Equipment
MaxFli adds two new U6 golf balls, the U6 LC and U6X, to its line
Last year, Maxfli turned heads in the golf industry with the introduction of the its U6 golf ball, the first-ever six-piece design to hit retail shelves.
The idea behind the ball was a good one: to offer golfers a lower-spinning option in the tour ball category for maximum distance and improved accuracy. That was achieved by giving the U6 a very low compression core, with layers that became gradually heavier as they moved outward toward the cover. That increased the ball’s moment of inertia (MOI), giving it even more stability and thus an even straighter flight. And like other tour-level golf balls, the U6 had a urethane cover to provide maximum spin and a soft feel on short shots around the green.
According to Ray North, director of product development for MaxFli Golf, the biggest problem with the U6 launch was that it wasn’t broad enough. That’s why Maxfli has added two new U6 models for 2014 — a lower-compression U6 LC and a higher-compression U6X — to maximize the ball’s performance for golfers with slower-than-normal and faster-than-normal swing speeds.
Like the U6, the U6 LC and U6X have low-compression cores, urethane covers and intermediate layers that gradually get heavier as they move from core to cover. That maintains the ball’s stability and low-spin performance. But the U6 LC was made with a lower-compression than the U6 to give golfers with slower swing speeds, between 80 and 95 MPH (with a driver), more distance off the tee. The U6, which will remain in the line for 2014, is better for golfers with swing speeds between 92-to-102 MPH, while the higher-compression U6X will be the longest U6 ball for golfers with swing speeds in excess of 102 MPH.
“We’re trying to make a straighter tour ball,” North said. “This might not be for Bubba [Watson], who likes to work the ball a lot off the tee, but for the majority of golfers it’s going to flight a little lower, spin less and roll out a little more. It’s a fairway-finding ball, and golfers are loving the spin they’re getting around the greens with it.”
All three U6 series golf balls have MaxFli’s Tri-Dimple design, which offers improves their aerodynamics, and will sell for about $40 a dozen when they hit shelves on March 6.
Whats in the Bag
Christiaan Maas WITB 2026 (June)
Driver: TaylorMade Qi4D LS (8 degrees)
Shaft: Fujikura Ventus TR Blue 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 9 TX

Irons: TaylorMade P770 (3), TaylorMade P7CB (4), TaylorMade P7TW (5-PW)
Shafts: Fujikura Ventus Black HB 10 X, True Temper Dynamic Gold X100

Wedges: TaylorMade Prototype (50-SB09), TaylorMade MG5 (56-HB12, 60-LV07)
Shafts: True Temper Dynamic Gold S400


Putter: TaylorMade TP Juno

Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Cord
Check out more in-hand photos of Christiaan Maas’ clubs here.
Equipment
TaylorMade MySpider Tour and Tour X: More customizable build options now available
TaylorMade Golf’s MySpider program underwent a substantial overhaul over the last month. Firstly, the company launched the option to customize the Spider ZT model, and now the program has returned with the MySpider Tour and MySpider Tour X.
The revamped page now gives golfers complete control over every visual and functional detail of their putter on the popular Tour and Tour X head, with every cosmetic idea thought of. In MySpider Tour, golfers can choose from four head finishes, 16 paint fill colors, nine Surlyn face insert colors, three aluminum insert options, six sightline configurations, and four hosel options — L-neck, small slant, double bend, center shaft. Six sightline options are available in MySpider Tour, including the optically engineered True Path alignment system. MySpider Tour X gives builders the option of four head finishes, four hosel configurations, and five sightline options, also including True Path alignment.
One of the more interesting features of the new MySpider program is the availability of three distinct face insert options. Along with the usual Surlyn Pure Roll insert trusted by Scottie Scheffler and Rory McIlroy, which can be customized from nine colors, golfers can now also select firmer options. Two are offered with the black aluminum Pure Roll insert, slightly firmer than the traditional insert, or for the firmest feel, golfers can choose from two colors of milled aluminum inserts.

Another fun addition to the MySpider Tour is the ability to use the “Tommy Sightline.” The custom alignment aid design, which was first drawn onto Tommy Fleetwood’s putter by PGA Tour Rep James Holley, is based on the milled sightline on his Spider ZT head. There are five shorter lines on the left and right of a longer central line serving as the traditional short line alignment aid.
See below for the full specifications sheet for MySpider Tour and Tour X:
MySpider Tour

MySpider Tour X

Equipment
Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory
In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.
McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.
So, with that, why not compare his current setup to the clubs he used to break all the records?
Driver
2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.
What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)
The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.
Fairway woods
2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.
Irons
2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.
With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.
Wedges
2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.
Putter
2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.
Ball
2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)
As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.
Grips
2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC
Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch





Richard
Feb 12, 2014 at 12:08 am
I agree with llamont. I tried all the Maxfli U series balls and haven’t found anything I like as much as the U4x. I sometimes play Titlelist pro v1 and 1x balls too and they don’t have anything over the U4x. I went to Dick’s to buy a few dozen and they were all out so I bought a couple dozen U4 balls which are pretty good too but maybe 8-10 yards shorter off the driver. Hopefully they keep selling the U4x balls as well as the U6 series
N
Jan 15, 2014 at 9:57 pm
Has anybody played these balls and how are they, really?
llamont
Jan 15, 2014 at 11:25 pm
I played the original U6 for a short stint and in my opinion, it is an okay ball. The whole “6 piece” ball thing may be a bit overplayed though. The spin was decent (definitely nothing special for a ball that’s supposed to be tour caliper) but the durability of the U6 left a lot to be desired. I’ve been playing the U4X since September and I really like that ball. For the money, I haven’t played anything close. I get decent length off the tee and the green-side spin rate is adequate (for me).
ericb
Jan 16, 2014 at 7:46 am
I played the U6 sample pack. They stay on line pretty easily. Solid feel off the driver, kind of clicky off the wedges but spun nicely with quick stops.
Billy Maddux
Feb 7, 2014 at 3:34 am
I tested golf balls last Spring and the U6 easily beat out all the big names. I found minimal difference in length over the TM Lethal, Nike XI or Pro V1 but they went straighter on the simulator and on the course in actual play. The REAL difference for me was in how they played around the green. Very similar feel to the Pro V1. When you factor in that one could buy them at a discount at Dick’s quite often, it was a no brainer decision. The reason I am at this site tonight is I just went to Dick’s site to see if they had any specials. I buy balls several dozen at a time and am almost out (I play 3-5 times a week). I was shocked to see they were not listed and went to looking for reasons why. Thanks to the author for letting us know and it looks like I will be buying a couple of dozen of something else until the rollout in early March. Probably some Nike XI as they are currently on sale. But I will be going back to the U6 and will never run out again.
JJ
Jan 15, 2014 at 3:24 pm
The relevant swing speed is driver swing speed I take it?
Zak Kozuchowski
Jan 15, 2014 at 5:28 pm
Yes.