Equipment
Odyssey’s Milled Collection putters comes to the U.S.
Odyssey’s new Milled Collection Putters were originally a Japan-only release, but like many successful equipment releases overseas, they’ve made the voyage to America.
The putters, which were released to PGA Tour players at the Arnold Palmer Invitational and have been available in Japan since September, are slightly different than Odyssey’s Works putters.
The biggest difference? The Milled Collection putters, as the name implies, are CNC milled. They also have adjustable weights in their soles.
Related: A White Hot Mesh: Odyssey Works putters
Face On: An Odyssey Milled Collection #9 putter
Like the Works line, the Milled Collection putters use the company’s Fusion RX inserts — a White Hot insert covered with a Metal-X stainless steel mesh cover. But compared to the Works putters, the Milled Collection models are made with flatter top lines and more squared off head shapes.
Odyssey’s Works (top) and Milled Collection #9 putters. Notice the flatter top line in the respective #9 models.
Although six models are available internationally, Odyssey’s Milled Collection will be released in the U.S. on April 17 in four models — #2, #5, #6M and #9. They will sell for $349 each.
The putters come with three sets of adjustable weights, which make 340-, 350- and 360-gram head weights possible so that golfers can fine tune feel.
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.
Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX
7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX
Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue
Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype
Grips: Golf Pride Tour Velvet Align
Ball: Titleist Pro V1
In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.
@Lamosteve began:
Can you name every set of irons you’ve owned? Here’s mine
Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6
Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
- JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
- jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
What’s the story behind Webb Simpson’s custom-stamped irons?
Memorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Aaron Rai’s winning WITB: 2026 PGA Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
J.T. Poston’s winning WITB: 2026 Memorial Tournament
Best irons 2026: Best irons overall, most forgiving irons, and more
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament. Driver: Titleist GTS2 (8 degrees) Shaft: Fujikura...
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting) Shaft: Mitsubishi Chemical Diamana RB 53 S 3-wood: Titleist GT3 (15 degrees,...
Asterisk Talley WITB 2026 (June)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Blue 6 S 3-wood: TaylorMade Qi4D (16.5 degrees) Shaft: Fujikura Ventus Blue...
Brianna Do WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees) Shaft: KBS PGW 3-wood: Callaway Elyte Titanium (15 degrees) Shaft: KBS PGW 5-wood:...
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News1 week agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag3 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
gunmetal
Mar 23, 2015 at 1:14 pm
I’m not sure if these differentiate from the standard Works collection enough to justify the $200 difference. “flatter toplines and more squared off head shapes”???? Oh and a weight kit??? Oh yeah and the part that you don’t use at impact is milled so that’s good. But I’m sure they’ll sell a crap ton.
HL
Mar 20, 2015 at 6:05 pm
If you cant put, you cant score. But if you cant drive you cant play.
I will buy a R15 TP instead, 🙂
Brian
Mar 19, 2015 at 12:31 pm
Why would I get this if its the same price as a Scotty? Serious question because I’m in the market for a real putter.
Dick
Mar 18, 2015 at 5:40 pm
inserts…yuck!
T-MAC
Mar 18, 2015 at 1:20 pm
Agree with Scooter. You are making contact with the face and if it has an insert, then it doesn’t really matter if it is a milled putter. Same thing with the Cameron’s that have inserts, like the TeI3 line or the new Golo series with the alum wrap around face that is supposed to give it a soft, insert-like feel. Why put that on a milled putter?
And where are the people who complain about Cameron’s putters costing 350.00 when Odyssey is at the same price point on their milled putters (and so are others)? Thing is, buy a 350.00 Cameron and a 350.00 Odyssey and sell them both a year later and see which one was the better investment. Won’t even be close.
Brad
Mar 18, 2015 at 1:33 pm
Well said Sir….
Benji
Mar 18, 2015 at 8:16 am
It looks like the significant advantage these have over the works is the the adjustable weights. The milling doesn’t seem to bring much to the table.
slider
Mar 17, 2015 at 1:58 pm
very similar to scotty odyssey is moving away from making putters for the masses and going to more high end stuff
Joe
Mar 18, 2015 at 1:06 pm
Odyssey does offer $350+ putters like every manufacturer should, but also offer high quality putters for less than half that.
Scooter McGavin
Mar 17, 2015 at 1:54 pm
I always wondered what the benefit there was to a putter being milled if it has an insert. I mean, you’re not hitting on milled grooves, and the insert is going to have the biggest effect on feel, right? So doesn’t that cancel out the feel aspect? Anyone care to enlighten me?
JE
Mar 17, 2015 at 2:58 pm
Marketing my friend. All about finding a niche and filling it with product. They make products according to where they think the demand will be. Apparently they see an opportunity to compete with SC, etc. Sell fewer putters but at a higher gross margin.