Equipment
Building the Bag: For Ryan Gerard, it’s all about launch and finding the right flatstick
On the next installment, we’re diving into the bag of a serial tinkerer – and we mean that in a good way. PGA Tour winner Ryan Gerard grinds harder than most in the game. He even made a 10,000-mile trip from the U.S. to Mauritius to earn himself a spot in this year’s Masters.
He takes that same attitude to his bag setup, always looking for new equipment to test to see if he can get to the next level.
For Gerard, a lot of the bag focuses on one aspect – launching the golf ball. The American is first to admit that his swing fundamentals mean that he delofts the club more than most at impact, so his clubs are fit accordingly.
Driver: Titleist GT3 11 degree (Mitsubishi Tensei 1K Blue 60 X) C3 SureFit

With an 11-degree head, set at C3 in the Titleist SureFit adapter (+.75 degrees), Gerard’s driver is set up to do one thing. Get it in the air.
“It’s a lot of loft, but I do tend to deloft it a little bit,” Gerard said.
Along with the higher loft on the face, Gerard’s GT3 features plenty of back-weighting to shift the center of gravity rearward to help increase the launch angle and also spin.
“It helps my start lines be a little more consistent,” Gerard added. “It’s kind of a heavier shell with like a slightly lighter track weight, which has helped me find what I’m looking for in flight and spring off the tee.”
Gerard predominantly plays a left-to-right shot off the tee, averaging just 89 feet in apex height, well below the PGA Tour average, and believes that his spin is on the higher side, up to 2800 rpm on some hits.
“I could probably gain a few yards if I dropped spin, but I’m really looking to hit the window and keep it in the fairway.
Woods: TaylorMade Qi10 HL 3-wood 16.5 degree (Fujikura Ventus TR Red 7X), TaylorMade Qi35 9-wood 24 degree (Fujikura Ventus TR Red 7X)

Gerard’s 3-wood didn’t come from a Tour truck, and it wasn’t sent to him to try out.
“I actually bought this online,” Gerard told GolfWRX. “I’ve gone through three or four 3-woods and I just keep buying them online because they’re still available, so please don’t buy all of them because I might go buy more.”
The high-lofted 3-wood, which helps Gerard achieve a better descent angle and apex, is one of two TaylorMade woods he’s added to his setup, thanks to the forgiveness they offer when hitting them off the turf and allowing Gerard to use them off the tee.
He also uses a Qi35 9-wood, which reads at 24 degrees, but in fact, he’s bent it down closer to 22 to help with gapping.
“If I took a 7-wood and added loft, it would look more shut to me,” Gerard said. “But taking a 9-wood and bending it down, it gives the flight and trajectory that I’m looking for, which is high and spinny, but looking square when I put it down, and I feel very comfortable that I can hit it straight.”
Irons: Titleist T250 4-iron (Mitsubishi MMT Hybrid 100 TX), T100 5-9 irons (KBS C-Taper 125 S+)

Gerard recently upgraded his 4-iron to Titleist’s new T250 after damaging his previous T100. Let’s just say it decided to hug a tree in Napa, California. The less said about that, the better.
“The only reason I did that, is because I knew I had a backup that I liked,” Gerard joked.
With the new T250, Gerard has been able to flight it better than he expected, thanks to the MMT Hybrid 100 TX he’s equipped it with. It’s another club in the bag that he’s added loft to, though, to help overall with his stock launch and apex. It’s actually 24.5 degrees, which is more than the standard 5-iron loft in the set.
“It’s a lot of loft for a big 4-iron, and that’s just because I’m delofting at impact, but it’s also a big profile, so it’s going to want more ball speed to begin with. So I don’t want tons and tons of ball speed. … The way I launch and deliver it, it hits the numbers I’m looking for.”
Progressing through the irons, Gerard’s 5- and 6-irons are both bent weak, but then from 7- to 9-iron they’re closer to standard. This helps with his gapping, for which he likes “13 to 14-yard increments.”
All the clubs in Gerard’s bag are half an inch longer than standard, so to help with the weighting in the irons, he plays B-weighted (slightly lighter) iron heads.
Vokey Design SM10 46.10F, SM11 50.08F, 54.10S, 60.08M wedges (KBS C-Taper 125 S+ (46)), (Dynamic Gold S300 (50-60))

Ryan Gerard might not be cleanly shaven, but his wedges are.
His custom Vokey wedges feature, or should say, do not feature the traditional BV logo. It’s because the team decided to grind away most of the head where the insignia should be.
Unlike his irons, which are made slightly lighter than standard because of his height, Vokey wedge rep Aaron Dill and his team have to shed excess head-weight to help with Gerard’s feel
“I used to play wedges that had bore holes, so they’d take two small bore holes on either side, but they stopped doing that,” Gerard said. “The material they use now is a bit more amenable to being ground off, so we’re grinding off logos and essentially just looking to lose a little bit of material to get that swing weight down.
“I’m a very feel player and I don’t want to feel something really heavy in my hands when I’m around the green because you’re just living in a world where the ball might come off a little hot or come off a little more unpredictable if you don’t have control of the club face.”
Putter: Scotty Cameron…something…

Most weeks on Tour, Gerard will carry at least two putters in the bag leading up to the event. In some tournaments, he’s used up to three or four putters during competition.
Models that he regularly sees in the bag are his Scotty Cameron Newport 2, a Tour prototype Phantom 3 or a Phantom 5.2 Circle T (with which he won the Barracuda Championship), a Phantom 9
“I really like it (Phantom 3) because it matches the characteristics of a smaller mallet with the feel of a blade,” Gerard told GolfWRX. “I’ve been a blade guy my entire life, and then started messing around with mallets here recently.
“I don’t think anything matches the feel and speed control of a blade. … I always try to have a Newport 2-style blade in the bag, just to have a back-up option that could go into play at any moment.”
Therefore, this part of the bag will most likely be different depending on when it’s read.
Ball: Titleist Pro V1
Despite looking for more launch throughout the bag, Gerard plays the Pro V1 for the feel and spin that he can tap into in his short game, especially in the case of short-sided spots found out on Tour.
“It gives me the feel I’m looking for, especially around the greens, … It allows me to make a confident and committed swing on short shots,” Gerard says.
Equipment
Slab city on the Korn Ferry Tour — Lead Tape Report
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.





Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.






Whats in the Bag
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype


Grips: Golf Pride Tour Velvet Align
Ball: Titleist Pro V1
Equipment
Name every set of irons you’ve owned – GolfWRXers discuss
In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.
@Lamosteve began:
Can you name every set of irons you’ve owned? Here’s mine
Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6
Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
- JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
- jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News1 week agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag3 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
