Equipment

The most iconic Titleist drivers of all time

Published

6 years ago

Oct 2, 2020

With the new TSi Series Titleist drivers on the horizon, there is no better time than now to take a look back at the history of the company’s metal woods and discuss their most iconic drivers to date.

Only time will tell if the newest drivers will earn a spot, but if everything we are hearing about the TSi drivers stands true, we could be adding to this list very soon.

Titleist 975D – 1998

The 975D was the very first “serious golfer” titanium driver. It was made famous thanks to Tiger Woods using one in 2000 to win the “Tiger Slam”, and David Duval, who is famous for being one of the few golfers to ever take away the world number 1 ranking from Mr. Woods in his prime.

It was a small pear-shaped head with a bore through hosel and full-face scoring lines that packed a real “thud” at impact. If you were a “player,” you probably used this driver!

Titleist 975J – 2001

The 975J’s release coincided with one of the most important equipment releases of the last 25 years—the original Titleist ProV1, which worked in conjunction to help golfers pick up a lot of yardage with the high-launch, low-spin revolution. Although the 975J was quickly surpassed a few years later by the 983K, it was the 975J that changed a lot of golfers’ perception about Titleist woods—and how could we forget the historically cool headcover!

One more note on the succeeding 983K. Its 2003 release also came alongside the original Pro V1x, which helped Ernie Els tame a windy Kapalua for an eight-shot victory at the 2003 Tournament of Champions. Golf hasn’t been the same since.

Titleist 905R – 2006

This was Titleist’s very first 460cc driver and was so good Adam Scott used the same model for well over six years. It offered a familiar pear shape, but in the biggest head size possible.

The 905R came shortly after the original 905 series drivers were released, which included the 400cc 905S and 905T models. The “S” was the deeper face lower spinning head (my personal favorite), while the “T” was the next evolution of the 983K. Both were popular, but with almost all other equipment companies at the time touting 460cc heads, Titleist had to keep up, and that’s where the 905R came in.

Speaking to “next evolution” products, one of the stock shafts in the 905R was the UST ProForce V2, and when it comes to cult driver head and shaft combinations, this one is a first ballot hall of famer.

Titleist 910D3 – 2010

After the 905 series, Titleist released some good-but-not-great drivers with the 907 and 909 series respectively (funny thing is, the 907’s can’t even be found on Titleist’s previous model archive). If there was one standout from that time it would be the 909D-Comp (for composite), which was the first Titleist driver to utilize a carbon composite crown. It was Titleist’s first real attempt at a more game-improvement driver, and for those that got fit into a 909D-Comp, it was a pretty good head, but what came next was the real revolution.

The Titleist 910 series—specifically the 910D3—ushered in the next generation of low spin adjustability. It was the first driver with hosel lie and loft adjustability, and it was also the first in the entire industry to offer independent control of both parameters. Although the adapter has been refined to save weight, the adjustments themselves have remained unchanged, which I believe proves just how revolutionary it was at the time.

Related Topics:featured

Up Next

WRX Insider: Inside the bag of Harris English

Don't Miss

GolfWRX Classifieds (10/2/20): BLADES! TaylorMade Rac MB, Callaway Raw, Mizuno MP-20

Ryan Barath

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

20 Comments

Matt

Oct 4, 2020 at 7:10 pm

This is great content. Brings me back to all those legendary Titleist drivers over the years!

Reply Report comment
duh

Oct 3, 2020 at 10:31 am

983 line more iconic than all apart from the 975D

Reply Report comment
bradley v adams

Oct 3, 2020 at 9:20 am

It’s INSANE that Terry McCabe is not mentioned…..inconceivable and yes that word means what I think it does.

Reply Report comment
Bruce

Oct 2, 2020 at 3:57 pm

983k needs to be on this list for sure! Still in my bag

Reply Report comment
Bob Jones

Oct 2, 2020 at 2:08 pm

I still play my 975D.

Reply Report comment
T

Oct 2, 2020 at 12:38 pm

Where is the 983K ???? That’s like leaving Larry Bird off the list of all time great Celtics.

Reply Report comment
Bob Castelline

Oct 2, 2020 at 11:35 am

Where are the persimmon drivers? I used to have the most gorgeous amber Titleist driver that I could work either direction and sounded like a golf club was meant to sound. I loved that club almost as much as my own children.

Reply Report comment
Mike Purcell

Oct 2, 2020 at 11:25 am

My wife still games my old 983K. We go to a demo day every now and then, she hits em all and says
“nope, they can’t beat mine, I’m good.”

Reply Report comment
Bri

Oct 2, 2020 at 11:09 am

Titleist PT? Hello…

Reply Report comment
Golfinnut

Oct 2, 2020 at 11:07 am

What’s ridiculous is that I still have every one of these models mentioned in my bags. I just used the 905R this past weekend & realized why I had it in the bag … it was an awesome fairway finder!

Reply Report comment
Paul Runyan

Oct 2, 2020 at 10:41 am

Love to see TXG’s Ian and Matty test the 905R against the new offerings from Titleist!

Just mentioned in a discussion that at 70, yikes!, that I’m longer with the Mizuno ST 900G and Pro V1/B XS vs the 905R with the Professional Titleist wound and/or the first iteration of the Pro V1.

I’m sure Mr Wunder can’t say that… ???? Tipped Ventus X … really?

Something to do during the off season.

Reply Report comment
- Anti-Old Cranky Rickheads
  
  Oct 5, 2020 at 12:37 pm
  
  We understand that you’re an old crusty curmudgeon that hates technology. Now I challenge you to have an even more outdated opinion.
  
  Reply Report comment
Ken

Oct 2, 2020 at 10:40 am

Still have my 905R and my 910D3 in my back-up bag

Reply Report comment
Jbone

Oct 2, 2020 at 10:29 am

Graffaloy Blue >>> V2

Still game the 905s with the blue

Reply Report comment
- T.D.
  
  Oct 2, 2020 at 11:25 am
  
  This!! The Grafally blue X STILL stands up against today’s shafts, I don’t care what anybody says.
  Sadly, I just had to pull the blue out of my 905R this week and put it in my TS3. That combo was so good, but TS3 is just a longer driver and I’m sure I’ll have this combo in the bag for a long time.
  
  Reply Report comment
  - Paulo
    
    Oct 3, 2020 at 9:59 am
    
    Shafts degrade after time. Be careful , it’s likely going to show noticeable performance issues if it’s been used too much. This is why stepson bought them wherever he could find them.
    
    Reply Report comment
Peter Uihlein

Oct 2, 2020 at 9:34 am

You left off the 983K which is arguably #1

Reply Report comment
Jason Geraci

Oct 2, 2020 at 9:18 am

The 975 is the first club that Bob Vokey worked on after coming over to Titleist from Founder’s Club.

I still don’t think that the TS line gets enough credit. It was the bridge to TSi and they are still winning in my fitting bay.

Reply Report comment
- golfraven
  
  Oct 3, 2020 at 10:51 am
  
  I fully agre. I would add the TS to the mix as it was an evolution from the 91x models. I’ll keep my TS3 in the bag for the sake of the triangle alignment which got dropped with the TSi – I personally think its a bummer but hey what do I know.
  
  Reply Report comment
  - Paulo
    
    Oct 3, 2020 at 2:31 pm
    
    In the eyes of the multi million dollar achusnet company and in particular their marketing and multi million dollar RnD departments , you sir, no precisely f all
    
    Reply Report comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory

Published

2 hours ago

Jun 11, 2026

Alistair Cameron

In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.

McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.

So, with that, why not compare his current setup to the clubs he used to break all the records?

Driver

2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.

What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)

The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.

Fairway woods

2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.

Irons

2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.

With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.

Wedges

2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.

Putter

2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.

Ball

2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)

As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.

Grips

2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC

Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.

Equipment

From the GolfWRX Classifieds: Titleist Vokey Proto Wedges 54M, 60T

Published

4 hours ago

Jun 11, 2026

Will Schube

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.

From the listing:

(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.