Equipment
Callaway Mack Daddy Forged Wedges: What you need to know
Callaway’s new Mack Daddy Forged wedges are quite different than the company’s current MD3 Milled wedges, and that’s by design. They’re not meant to replace the MD3 Milled or any other Callaway wedge model, but rather expand the company’s wedge offerings to meet the needs of different golfers.
As their name suggest, the biggest change to the Mack Daddy Forged wedges is that they’re forged from a soft 1025 carbon steel. Here’s what else you need to know about the new Mack Daddy Forged wedges, which will sell for $149.99 each when they hit stores on January 20.
What You Need To Know
Lofts Available: 50, 52, 54, 56, 58 and 60 degrees
Stock Shafts: True Temper Dynamic Gold S200 Tour Issue (Blue Label)
Stock Grip: Lamkin UTX
Finishes: Satin Chrome (silver) and Brushed Slate (black)
- The Mack Daddy Forged wedges have a unique shape that resonated instantly with Callaway Staffers Henrik Stenson and Thomas Pieters, who both used the new wedges at the 2016 Ryder Cup. New Callaway signing Daniel Berger is also using the new wedges.

- Compared to other Callaway wedges, the Mack Daddy Forged have less offset, squarer toes and straighter leading edges. Callaway wedge designer Roger Cleveland says that a straighter leading edge makes a wedge easier to align.
- The Mack Daddy Forged have what Callaway calls an •R• Grind. It’s similar to the C Grind used on Callaway’s MD3 Milled wedges, Cleveland says, but it is more relieved in the heel and toe areas to offer more versatility around the greens. Cleveland calls it a “mid-bounce” grind, suitable for everything from open-faced lobs to square-faced bump and runs.
- Expect more spin from the Mack Daddy Forged’s new 16-groove design, which adds a groove near the bottom of the wedge face to promote increased stopping power, especially on shots of 10-20 yards.
- Like Callaway’s MD3 Milled wedges, the Mack Daddy Forged use Callaway’s Progressive CG Position. As loft goes higher, so does each wedge’s center of gravity to create maximum spin.

- The wedges are offered in two finishes: Satin Chrome and Brushed Slate. The Satin Chrome wedges have a layer of copper beneath their Satin Chrome plating, which creates a unique feel and improves durability. In the high-wear areas of a wedge, such as the face and sole, the copper layer will become visible with use. Brushed Slate wedges will wear to a raw finish.
Related: See what GolfWRXers are saying about Callaway’s Mack Daddy Forged wedges in our forum.
Equipment
Slab city on the Korn Ferry Tour — Lead Tape Report
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.





Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.






Whats in the Bag
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype


Grips: Golf Pride Tour Velvet Align
Ball: Titleist Pro V1
Equipment
Name every set of irons you’ve owned – GolfWRXers discuss
In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.
@Lamosteve began:
Can you name every set of irons you’ve owned? Here’s mine
Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6
Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
- JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
- jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News1 week agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag3 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch



edge of lean
Jan 20, 2017 at 9:55 pm
Any offerings for us lefties? Y’know, being peddled by Mickelson and all.
Troy Sheaffer
Jan 11, 2017 at 1:28 pm
Used the MD3 Wedges for a bit over a year and they have been great. Looking forward to seeing and testing these wedges to determine if a change would be beneficial.
Rich
Jan 11, 2017 at 2:09 am
Can’t wait to see/try these, they look great!
MT
Jan 10, 2017 at 5:32 pm
why Rory Mcilroy doesn’t play them and uses Titlest instead?
MT
Jan 10, 2017 at 5:29 pm
what you need to know is that their highest ranked player Rory McIlroy is playing Titlest wedges instead of that Callaway wedges and that are the only clubs in his bag that are not Callaway.
booya cornflakes
Jan 13, 2017 at 12:40 pm
Correct. But how does Rory’s preference in wedges relate to whether these will fit my game?
FWIW, I currently play MD3’s, and they kicked my SM6’s out of the bag. I just like the feel better, they’re both good wedges. Stop being such a fanboy.
Scott
Jan 25, 2017 at 4:30 am
What Rory plays with doesn’t mean squat to me or my game.
jgpl001
Jan 10, 2017 at 4:37 pm
These look good, very good
I am not a TM fan, but have been playing the TM EF wedges for the past 6 months and they are excellent, perfect head shape and loads of bit, just wish they were a touch softer
Tempted….
S Hitty
Jan 10, 2017 at 2:40 pm
He copied the TM EF wedges. Sharper leading edge, squarer toe, 1025 soft carbon. Because the MD3 was so crappy
Mark
Jan 10, 2017 at 1:49 pm
Well that is my birthday present sorted. 54 and 58 in slate finish. Marvellous.
Joshuaplaysgolf
Jan 10, 2017 at 12:09 pm
Could something pull these Vokeys out of my cold dead hands?? And my wife and I just did our 2017 golf budget last night….I’m highly intrigued to demo these.
Woop
Jan 10, 2017 at 4:30 pm
Should’ve been using the TM EF wedges.
Charlie
Jan 10, 2017 at 9:34 am
Dammit Callaway – We need more lofts!!! Was hoping to grab a 46 or 48 from this new lineup and possibly a 64!
Cornwall1888
Jan 10, 2017 at 9:12 am
I’d like to use forged wedges but I like to get a few seasons out of a wedge I think forged wedges would wear to fast
The dude
Jan 10, 2017 at 3:21 pm
Jeez….how many rounds you play?…live in FL?
Woop
Jan 10, 2017 at 4:31 pm
Get the TM EF wedges. Those grooves will last you 18 months easily
Mike
Jan 11, 2017 at 12:42 am
yep my TM EF 60 is still going two years and no difference in performance.. playing all year round
C
Jan 10, 2017 at 7:43 am
I like that lowest groove. Sure it is great for chips around the green. But it’s also useful to try and back up my skulled shots that bound across the green.