Connect with us

Equipment

True Temper to release X7, the iron shafts used by Jason Day

Published

on

Want to play the same iron shafts used by Jason Day? You’re in luck. True Temper will release its extremely low-launching, low-spinning X7 iron shafts through its network of Performance Fitting Centers and aftermarket dealers starting Jan. 15, 2016.

What makes the X7 different than True Temper’s Dynamic Gold X100 shafts, which are a favorite among PGA Tour players, is their heavier, stiffer construction. They’re approximately 4-5 grams heavier than X100 models, tipping the scales between 134 and 135 grams each. They also have slightly thicker butt sections, which make that part of the shafts stiffer.

While new to the retail market, the X7 was actually created in 2005.

“It was originally made as a compliment to the X100,” said David Walker, senior director of sales and global tour operations for True Temper. “Year in and year out, we had one or two guys try it. It was mostly long-drive guys who wanted something heavier and stiffer. As the years have gone by, more guys try it because they’re getting stronger and have so much more speed.”

Dynamic_Gold_X7-7

The X7 is the lowest-launching, lowest-spinning model in True Temper’s Dynamic Gold iron shaft family.

A great example of today’s stronger, faster PGA Tour players is Day, whose search for a lower ball flight with his irons led him to the X7. With the new iron shafts, he saw a reduction of 400-600 rpm of spin, as well as a launch angle that was approximately 1-degree lower than his previous iron shafts in initial testing.

Day used the X7 to win four of six tournaments in the months of July, August, and September, including the RBC Canadian Open, the PGA Championship and two PGA Tour Playoff events, sparking never-before-seen interest in the shaft.

“Since then, we’ve had quite a few college players and some guys on the Web.com [Tour] ask about it specifically,” Walker said. “Many of the readers of [GolfWRX] have called as well.”

Golfers don’t necessarily need to create as much club head speed as Day — 120 mph on average in 2015 on the PGA Tour — for the shafts to work for them.

“We have a couple of players testing the X7 that wouldn’t strike you as the longest players, but they really don’t want the shaft to flex at all,” Walker said.

If you do find that the X7 is a fit for your game, you’re in good company. Jamie Sadlowski, arguably the longest driver of the golf ball on the planet, uses the X7 shafts in his irons.

25 Comments

25 Comments

  1. Russell NOT Wilson

    Nov 20, 2015 at 6:11 pm

    10 & 20 years ago these would definitely have been in my testing pool, my metal fairways were tipped Rifle 7.0s that my club builder said it would equal 8.0. Using the Tour Balata and later the Professional, I would still hit my 13* Tour Spoon miles into the air and land from 245 to 275 dependent on what the wind and temperature were that day. I did find the perfect iron shafts in the TTDGX100SL, lower launch, lower spin, both what I wanted to control shot height/peak. The next best was the Rifle Tour Light (can not remember the exact name) developed with input from Colin Montgomery. 10 grams lighter with super stiff tip section. Now after a prolonged battle for my health. my driver swing speed is down to 100 mph, eliminating those sets from use currently. But now back into the gym to regain my core and extremity strengths to see if I can regain my swing speed. My one opportunity to be measured was at the LPGA tourney at Meridian CC, 1996. I chose a 3 wood from the demo barrel, all were over length as was this 3 wood, but 43 inches matched my driver length. The operators were struck speechless when I recorded my swing speed at 116 mph with consistent ball strike and speed consistency. Bonus that week, I got to caddie for Gail Graham for a practice round. Being completely green, I was not the best caddie, but I was inside the ropes and got to observe how the professional caddies worked together to confirm green depths, carry distance over bunkers and raking bunkers the other caddies were allowed to clean the golf ball for a co competitor as it did not qualify as substantial assistance to be ruled as using more than one caddie. The interactions between golfer and caddie, how they wrote notes into their yardage books, info like exactly how far a club traveled on a uphill hole, as well as on a down hill hole. And my first exposure to laser distance measurements, the caddies would make a half dozen measurement per non par 3 hole to get more precise yardage’s then the steel fishing line used by the yardage books publishers. But enough about my example, when I attempted to qualify for the US Publinks, I finished three strokes out of the playoff for the 2 remaining spots tied with 5 golfers. Watching these guys made me feel like a 18 handicapper, booming drives, iron shots that had tremendous impact reports like a pistol. They turned a 470 yard uphill par 4 into a drive and pitch hole, something I could not even imagine in real life. So there are likely 5,000 guys in the US that would be candidates for the 7X, plus the additional 20,000 guys that think that they can use it also. Thank you WRX for keeping us non pro golfers up to date with equipment for playing golf.

    • Ronny Dunn

      May 11, 2016 at 5:09 pm

      I would love to get first hand knowledge on how the best manage the course. Did it help your game.

  2. Chris

    Nov 15, 2015 at 12:02 pm

    I have a 115mph swing speed and play a 125 gram shaft. I feel with a softer shaft I can work the ball right to left easier. Just get fit and let the professionals tell you what you need.

  3. Steve

    Nov 12, 2015 at 9:25 am

    I think its a combo of swing speed and how hard you transition from the top. Day swings hard. Seems these would fit .1% . Most hacks that would play these are delusional.

    • P

      Nov 15, 2015 at 3:02 pm

      My driver SS is 105, I hit my 7 iron to 165. I can’t wait to get these X7 so I can hit them dead straigtht and dead low with no movement in any direction, perfect for windy days.

  4. Joe

    Nov 12, 2015 at 12:00 am

    Ill be hard-stepping mine…x2

  5. Steve

    Nov 11, 2015 at 7:15 pm

    its nice that TT is bringing these to market but im going to guess very few golfers will actually benefit from these

  6. Jason G

    Nov 11, 2015 at 2:29 pm

    I love the cynicism on this site. Yet another money grab for True Temper. I wish they would work on the quality of the Dynamic Gold line instead of offering heavier versions of the same, low quality stuff.

    • Tom

      Nov 11, 2015 at 3:14 pm

      I have been using T T Dynamic golds for over a decade with no problems.

      • christian

        Nov 12, 2015 at 5:34 pm

        I’m thinking he refers to the fact you need to go “Tour Issue” with DG in order to get the tolerances offered by for example Nippon as standard

  7. KK

    Nov 11, 2015 at 1:52 pm

    Monster iron shafts. They certainly work for Jason.

  8. Double Mocha Man

    Nov 11, 2015 at 12:01 pm

    Ah, remember those good ol’ days when shafts were regular, stiff and ladies and nobody thought much of it.

  9. Booey

    Nov 11, 2015 at 11:11 am

    These were available for years until a couple years ago. They’re coming back with the heat transfer logo on them and will be available in January. They aren’t as stiff or heavy as you would think from the X7 designation. They are 132 grams and the overall bend profile is stout but not a board. The big advantage to these is the tips are reinforced so it will bring the flight down and knock spin off compared to the X100s. Anyone who has built with these has seen how much beef is in the tip section because they swingweight pretty heavy. They’ll be available in sets and extra 40.5″ raw lengths so you will be able to soft step them.

  10. DatSliceDoe

    Nov 11, 2015 at 10:33 am

    Do they make these in 2x hardstepped X700? Need moar flex for my 800 yd pitching wedge and 200mph clubhead speed.

    In all seriousness, Day’s ball flight is sky high even with these shafts. I would be hard pressed to see how this shaft lowered it based on what we saw this year.

  11. Jake Anderson

    Nov 11, 2015 at 10:26 am

    this is the right shaft for me obviously, because unlike anyone else on golfwrx i can carry the ball 320 in the air.

    • Christestrogen

      Nov 11, 2015 at 1:10 pm

      I do that with my 9 iron.

      -Christosterone

    • Joe

      Nov 11, 2015 at 1:13 pm

      PSSSSHHHHH… 320? That’s my 6 iron. 😛

      • timbleking

        Nov 11, 2015 at 3:45 pm

        I do it with my putter…

        • Anthony

          Nov 11, 2015 at 4:53 pm

          I used to do 320 with the putter but injured my hand. Now its a short 318 yards and I’m disappointed with the loss of yardage lol

          • Jake Anderson

            Nov 13, 2015 at 5:55 am

            i do not believe any of you obviously.

            • KA

              Nov 14, 2015 at 2:16 pm

              That’s a flip wedge for me. Go get your numbers better brah.

      • cgasucks

        Nov 14, 2015 at 8:11 pm

        That’s nothing….my lob wedge carries that far…on a chipshot…

    • other paul

      Nov 11, 2015 at 8:12 pm

      My record is 450. Just saying ????

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Slab city on the Korn Ferry Tour — Lead Tape Report

Published

on

This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.

Joel Thelen

Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.

First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.

Mitchell Meissner

Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed. 

Continue Reading

Whats in the Bag

Bud Cauley WITB 2026 (June)

Published

on

Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype

Grips: Golf Pride Tour Velvet Align

Ball: Titleist Pro V1

See more in-hand photos of Bud Cauley’s clubs here.

Continue Reading

Equipment

Name every set of irons you’ve owned – GolfWRXers discuss

Published

on

In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.

@Lamosteve began:

Can you name every set of irons you’ve owned? Here’s mine

Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6

Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
  • JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
  • jgrzask: “Tommy Armour 845u
    Mizuno MP-32
    Mizuno MP-33 (2 sets)
    Bridgestone J33cb – still own
    Srixon i-302 (2 sets) – still own
    Tourstage X-Blades – still own
    Mizuno Hot Metal – still own
    Nike Forged Blades – still own
    Titleist 714 AP1 – still own
    Cobra Forged SS – still own”

Entire Thread: “Name every set of irons you’ve owned.”

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending