Equipment
Mizuno Pro M13 vs Callaway X Forged: My actual fitting numbers – GolfWRXers discuss
In our forums, our members have been reacting to a fitting session involving Mizuno’s Pro M13 and Callaway’s X Forged irons. WRXer ‘careergolfer’ recently went through a full fitting session and shared his numbers and commentary, saying:
“After playing Callaway Apex Pros for the pats 5 years, just went through a full iron fitting and thought the data was interesting enough to share. I’ve seen a lot of posts talking about fittings but not many with actual numbers, so here’s mine.
All 7-iron, same ball, same session. Final two were the ones I was choosing between:
| Club | Ball Speed | Launch | Spin | Side Angle | Carry | Total |
|---|---|---|---|---|---|---|
| Current irons | 121.1 mph | 18.3° | 6,691 rpm | 0.7L | 170 | 178 |
| Callaway X Forged | 125.8 mph | 15.9° | 6,144 rpm | 2.2L | 180 | 185 |
| Mizuno M-13 | 125.8 mph | 17.9° | 6,638 rpm | 2.2L | 177 | 182 |
The consistency numbers are what actually made the decision:
| Club | Ball Speed SD | Spin SD | Total Yards SD |
|---|---|---|---|
| Current irons | 3.3 | 294 | 5 |
| Callaway X Forged | 2.0 | 211 | 3 |
| Mizuno M-13 | 1.1 | 150 | 2 |
Callaway won on distance by 3 yards but got there with a much lower ball flight (15.9° launch, 6,144 spin). The Mizuno matched my existing flight profile with nearly 3x tighter ball speed consistency.
Fitter also noted I’ve been setting up with a closed face at address to compensate for a heel-heavy dynamic lie. Ordered the M-13s 1° flat to bring impact back to neutral: the theory being if I can set up square, I can actually commit to the release. I’m not sure if this was the right call TBH but took the fitter’s guidance. I’ll see what happens.
Went with the Mizuno. Clubs aren’t in hand yet. Happy to share follow-up data once I’ve played them!”
And our members have been sharing their thoughts in response.
Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PowerCobra98: “M13 certainly performed well. Enjoy the new irons once you get them!”
- dmeeksDC: “Two completely different irons. The X Forged is a tour-type iron and would match up with the S3 in the Mizuno lineup. Not going to see a lot of M-13 on pro tours. It’s a crossover iron, three different types of construction in the same set. The M-13 would be more like the AI 150 as the M-13 7 iron is a half-hollow club versus X Forged, which is a straight up forged iron. M-13 middle irons have very thin faces, not holding up well for some buyers if you read through the M-13 thread. Hopefully Mizuno has corrected it. Given the differences in construction, that is surprising ball speed with the X Forged. To me the numbers are quite an endorsement of the X Forged considering it has no ‘tech.'”
Entire Thread: “Mizuno Pro M13 vs Callaway X Forged: My actual fitting numbers – GolfWRXers discuss”
Equipment
From the GolfWRX Classifieds: Titleist Vokey Proto Wedges 54M, 60T
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.

From the listing:
(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.
(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.
Whats in the Bag
Ryan Palmer WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees)
Shaft: Project X HZRDUS Smoke Blue RDX 60 TX

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Project X HZRDUS T1100 70 6.5

5-wood: TaylorMade SIM2 Max (18 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 80 TX

Irons: Srixon ZXiU (23 degrees), Srixon Z785 MB (5-PW)
Shafts: Project X HZRDUS Smoke Black RDX 100 6.5 (4), KBS Tour 130 X

Wedges: Titleist Vokey Design SM11 (50-08F, 54-10S, 58-04T @59)
Shafts: KBS Tour 130 X

Putter: Odyssey Dual Force Rossie II

Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet
Equipment
Slab city on the Korn Ferry Tour — Lead Tape Report
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.





Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.






-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch

Bob Smith
May 11, 2026 at 9:18 am
Talked to my local golf shop and the don’t have m-13 to demo due to both fitting head beind caved in.