Connect with us

Opinion & Analysis

The Wedge Guy: Lob wedge – friend or foe?

Published

on

One of the most common questions I’m asked by golfers is about my thoughts on the highest loft wedge you should carry, so I thought that would make a good topic for today’s post.

Let me start with a bit of history of putting wedges in our bags, as that might help make sense of the subject for each of you.

After the invention of the sand wedge in the 1930s – a breakthrough design generally credited to Gene Sarazen – most golfers began to carry one. From that time through the 1940s, most golfers relegated that club to only those shots hit from the sand. Most “sand wedges” from that time until the mid-1980s were about 55-56 degrees in loft, but loft was not a specification that many paid much attention to. Sets of irons had a “pitching wedge” of about 50-52 degrees, and that was the more generally used club for greenside shots and short pitches. In his 1949 book, “Power Golf,” Ben Hogan wrote that the sand wedge could be a great tool for certain greenside shots.

Through the 1940s, 50s, 60s, 70s, and 80s, most of golf’s biggest stars only carried one “wedge” after their set-match pitching wedge. Many of them used that club to great success, and we witnessed near genius in the likes of Tom Watson, Phil Rogers, Seve Ballesteros, and others.

Tom Kite began using the first 60-degree wedge to great success, and his 1992 US Open victory was the icing on that cake. They say he was deadly from his “magic number”—63 yards, as I remember. Those first 60-degree wedges had very large heavy soles, with very pronounced camber from front to back. And they were very difficult to master for most recreational golfers.

Since that time, the higher lofted wedges have taken on more of the look of the traditional sand wedge, and the loft selection was expanded with 58 and 60 degrees most common, but there are offerings as high as 70 degrees! I believe Phil Mickelson gave the lofts over 60 degrees more visibility and curiosity than anyone.

So, with all these choices, what do each of you do with regard to deciding how high to go with the loft of your wedges? The reality is that the answer to that question is different for everyone, but let me try to help you make sense of the process.

My observation is that the lofts over about 57-58 degrees are much more challenging to master for most recreational golfers. Even on the PGA Tour, the 58-degree has become the more common lob wedge. That’s because as loft increases above that level, controlling ball flight and distance becomes more and more difficult, even for the most skilled players. Most golfers have a hard time making as full a swing as required to move the ball a given distance with these high loft wedges. That said, I have seen recreational golfers that do a great job and use their high-loft wedges to great utility. But that number is very small.

Mastering the higher lofted wedges of 60-64 degrees requires a great deal of practice, hitting all kinds of shots from whatever distance you consider “full” to delicate greenside chips and pitches. If you can take the time to do that, then you might turn that high-loft wedge into a powerful scoring tool. But if you don’t… well, my bet is that it will cost you more shots than it saves.

As I’ve often stated, I firmly believe you should select wedges that give you consistent distance differentials on full swings from your set-match 9-iron or “P-club,” all the way down to your 56-58 wedge. For most golfers, that differential should be not more than 12-13 yards for optimum scoring. Depending on your strength profile, those loft differences could be as wide as 5-6 degrees, but 4 seems like it works for the vast majority of golfers.

Whether you choose to carry a lob wedge at all, and what loft it should be, must be left to your own experiences with various options and an honest assessment as to whether that club should have a place in your bag.

More from the Wedge Guy

Terry Koehler is a fourth generation Texan and a graduate of Texas A&M University. Over his 40-year career in the golf industry, he has created over 100 putter designs and dozens of wedges. In 2014, he put together the team that reintroduced the Ben Hogan brand to the golf equipment industry with his TK 15 wedges and Ft. Worth 15 iron designs. Since receiving a U.S. Patent for his “Koehler Sole” in the early 1990s, he has been challenging “conventional wisdom” in the wedge category. In addition to inspiring multiple companies to emulate this sole technology, the performance of his wedge designs have stimulated all other companies to reposition some mass toward the top of the blade in their wedges. Terry is retired from his role as Chairman and Director of Innovation for Edison Golf, and remains active in the industry as an independent designer and consultant.  But his most compelling work is in the wedge category. Since he first patented his “Koehler Sole” in the early 1990s, he has been challenging “conventional wisdom” reflected in ‘tour design’ wedges. The performance of his wedge designs have stimulated other companies to move slightly more mass toward the top of the blade in their wedges, but none approach the dramatic design of his Edison Forged wedges, which have been robotically proven to significantly raise the bar for wedge performance. Terry serves as Chairman and Director of Innovation for Edison Golf – check it out at www.EdisonWedges.com.

2 Comments

2 Comments

  1. Pingback: The Wedge Guy: The most important shot in golf – GolfWRX

  2. Bob Jones

    Apr 4, 2025 at 11:15 am

    I used to carry a 60* wedge, but I just didn’t use it often enough for it to have earned a place in my bag. I found I could hit the same shots with it just by opening up my 56*, and they were easier to control with that club. As well, taking out the 60* created a spot for another club which I have taken good advantage of.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Opinion & Analysis

AVL: My U.S. Amateur local qualifying experience

Published

on

This past Monday, I played in the U.S. Amateur local qualifier at Rock Creek Country Club in Portland, Oregon. A full tee sheet from 7:30 a.m. to 1:55 p.m., the top 11 scores would make it to the U.S. Amateur final qualifying.

I teed off at 10:48 a.m.. With the 7:30 am tee time, you can get a feel for the leaders’ pace, and they were off and running on the challenging setup at Rock Creek.

 

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)


Getting to the highlight of the round on the par five 17th, a drive up the left side and 212 yards left to the front hole location. I took out a 5-iron with plans of middle of the green. The ball ended up 8 feet left of the hole, pin high. A slight downhill putt dropped in for an eagle 3 on the 17th. With the cut line looking to be anywhere from -2 to even par. This was the boost I had been waiting for all day.

With making par from the trees on 18, it was time to wait for a potential playoff with a posted score of one under par 71.

Three hours later, it was playoff time. 8 players for 6 spots. I made par on the playoff hole, which was good enough to advance to the U.S. Amateur final qualifying in July. USGA qualifiers sure deliver on all of the emotions in golf!

Continue Reading

Club Junkie

Building my 2026 gamer WITB: Ranking the contenders and new putter projects – Club Junkie Podcast

Published

on

The annual What’s In The Bag build is underway, and on this episode of Club Junkie, Brian breaks down the clubs currently leading the race for a spot in his 2026 gamer setup. From drivers and fairway woods to irons, wedges, and shafts, he ranks the equipment that’s performing best and explains what’s separating the front runners from the rest of the field.

Brian also heads into the workshop to discuss several putter projects currently on the bench. From head options and shaft choices to build ideas and testing plans, he shares what he’s working on and which putters could become serious contenders for the bag this season.

If you’re a gear junkie who loves equipment testing, club building, and the never-ending pursuit of the perfect setup, this episode is for you.

Follow Club Junkie:
Instagram: @clubjunkiepod
TikTok: @clubjunkiepod
Threads: @clubjunkiepod
X: @ClubJunkiePod

Continue Reading

Club Junkie

Tour Edge Exotics mini driver review + TaylorMade Spider ZT Max first look – Club Junkie

Published

on

On this episode of Club Junkie, I put the new Tour Edge Exotics Mini Driver to the test and break down the performance, forgiveness, distance, and where it fits compared to a traditional driver or strong fairway wood. If you have been curious about adding a mini driver to the bag, this one is worth a look.

I also dive into the new TaylorMade Spider ZT Max putter that was recently spotted and discuss the growing zero torque putter trend. Plus, there is a closer look at the new Project X Titan Yellow shaft showing up on the PGA Tour and what makes it different from other profiles currently out there.

 

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending