Connect with us

Equipment

Spotted: Scottie Scheffler with prototype Logan Olson putter

Published

on

We have seen Scottie Scheffler testing out a few different putters from traditional blades to custom mallets recently.

At the Hero World Challenge, Scheffler has been spotted with another new putter, this time from a manufacturer many golfers may not be familiar with: Olson Putter Co. Started by Logan Olson, the company has been making some amazing custom putters for over seven years.

Olson’s putters have classic head shapes but are highly customized with a lot of cosmetic — and performance-enhancing — machining.

Recently, Olson took a break from posting much on social media or creating putters for customers, and people were concerned he was out of the business. Olson then posted a note explaining that he had the chance to work on something different, and now we see what that was.

Photo via Logan Olson on Instagram.

Scottie Scheffler’s putter is custom-built and based off an Anser 2 or Newport 2 head shape. This means it is a traditional blade with sharper angles and a boxier look from address. The flange looks to be slightly extended from the face and has a single site line painted black on it. The top line has a very interesting alignment aid; it looks to be many small milling lines that run from the face to the flange to possibly frame the ball better.

Larger bumpers are slanted down towards the center cavity where “Logan Olson” is stamped in a dancing font and the “O”s are all circles with fancy “L”s in them. The neck looks to be one piece with the body of the putter as the milling around the base is very angled and complicated. A standard-length plumbers neck rises up and the corners of it look to be softened just a bit. The face has what looks like a shallow milling to it with the Olson logo on the heel.

 

View this post on Instagram

 

A post shared by O L S O N PUTTER CO (@olsonmfg)


The underside of the putter reveals a tri-sole stamped “343/303.” We can assume that the weight of the putter is 343 grams and it is milled from 303 stainless steel. Scottie’s name is also stamped into the sole, and another circle with an ornate L is stamped out on the toe.

More “spotted” pieces

I have been an employee at GolfWRX since 2016. In that time I have been helping create content on GolfWRX Radio, GolfWRX YouTube, as well as writing for the front page. Self-proclaimed gear junkie who loves all sorts of golf equipment as well as building golf clubs!

4 Comments

4 Comments

  1. Jim Thomson

    Dec 3, 2023 at 10:06 am

    With a little imagination, one can make out the letters O, L, S, and N in the so-called “circles with fancy “L”s in them.” Perhaps it’s an Olson trademark?

  2. T-Bone

    Dec 1, 2023 at 12:59 pm

    That doesn’t look just like a Cameron…at all.

  3. Vince

    Dec 1, 2023 at 11:51 am

    Wow, a stainless steel (cheap), milled Anser 2 style putter.

  4. Bruce

    Nov 30, 2023 at 6:10 pm

    The minute these Anser knockoff poseurs start to pay KARSTEN for the design rip-off they are profiting from, I’ll pay attention. Patents expire but these just shameless exploitation of his inspired designs.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Slab city on the Korn Ferry Tour — Lead Tape Report

Published

on

This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.

Joel Thelen

Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.

First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.

Mitchell Meissner

Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed. 

Continue Reading

Whats in the Bag

Bud Cauley WITB 2026 (June)

Published

on

Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype

Grips: Golf Pride Tour Velvet Align

Ball: Titleist Pro V1

See more in-hand photos of Bud Cauley’s clubs here.

Continue Reading

Equipment

Name every set of irons you’ve owned – GolfWRXers discuss

Published

on

In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.

@Lamosteve began:

Can you name every set of irons you’ve owned? Here’s mine

Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6

Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
  • JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
  • jgrzask: “Tommy Armour 845u
    Mizuno MP-32
    Mizuno MP-33 (2 sets)
    Bridgestone J33cb – still own
    Srixon i-302 (2 sets) – still own
    Tourstage X-Blades – still own
    Mizuno Hot Metal – still own
    Nike Forged Blades – still own
    Titleist 714 AP1 – still own
    Cobra Forged SS – still own”

Entire Thread: “Name every set of irons you’ve owned.”

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending