Equipment

Scotty Cameron Futura X7 and X7M putters

Published

11 years ago

Oct 6, 2015

Models: Futura X7 ($379), Futura X7M ($379), Futura X7M Dual Balance ($399)
Finish: Silver Mist with black anodized sole
Shaft Bend, Offset, Hang: Single, One Shaft, Face Balanced
Loft, Lie: 3.5 degrees, 70 degrees
Grip: 10-inch Matador Mid Red Midsize (77 grams)
Availability: October 23

Scotty Cameron’s new Futura X7 and Futura X7M putters are designed to deliver more stability and consistency on the putting green, with a multi-material construction that boosts the forgiveness of the putters.

[quote_box_center]“The motivation behind Futura X always has been to help golfers make a more stable, more balanced, more consistent, more confident stroke,” Scotty Cameron said in a Titleist press release. “We’ve enhanced those benefits with X7 and X7M through larger, multi-material constructions that make alignment simple. For the golfer, that translates into higher MOI for stability, a bigger sweet spot for forgiveness, easier alignment for a more confident setup, and a better, softer feel.”[/quote_box_center]

Golfers familiar with Cameron’s Futura X5 putter will notice that the X7 shares the same head shape, with the X7 being approximately 10 percent larger.

[quote_box_center]“The X7 is a line extension of the X5. It has the same head shape, but larger,” Cameron said. “A lot of touring pros requested it be larger. The larger we make it, the more forgiving it becomes with a larger sweet spot. This also allows us to add more alignment lines. The more lines, the easier it is to line up the ball.”[/quote_box_center]

What might go undetected, however, at least until golfers hit a putt with the X7, is the change in construction. The X7 uses what Cameron calls an “aluminum face-sole core,” which is surrounded by a stainless steel frame. Also, since the face of the X7 is made from aluminum, it will deliver a softer feel than the X5, which uses a 303 stainless steel putter face.

[quote_box_center]“The key feature is the two materials,” Cameron said. “Basically there are two constructions involved here. The feel and sound of the lightweight midsection are married together with the heavier surrounding heel, toe and back to be more forgiving, for better performance.”[/quote_box_center]

The X7M offers golfers a shape that resembles the X7, but adds what Cameron calls a “Bar-back design” that further boosts the MOI of the putter.

[quote_box_center]“With X7M, I wanted a round shape with a crisp and sharp look for alignment,” Cameron said. “X7 and X7M have a lot of the same features but the X7M is manipulated and made with a back weight for more MOI – thus the name, X7M, where the ‘M’ stands for MOI. Instead of having big ears and weights in the back [as in the Futura X], which some might call cumbersome, the bar on the back with the weights streamlines the shape. A few tour players also said shadowing on the course can sometimes affect sight lines, so on the X7M I raised the alignment lines and made them even longer.”[/quote_box_center]

The X7M is also available in a Dual Balance model, which uses a heavier head (400 grams) that is counterbalanced with a 15-inch grip and a 50-gram weight installed in the butt end of the putter.

[wrx_retail_links productid=”40″]

Equipment

Slab city on the Korn Ferry Tour — Lead Tape Report

Published

16 hours ago

Jun 10, 2026

Andrew Von Lossow

This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.

Joel Thelen

Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.

First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.

Mitchell Meissner

Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.

Whats in the Bag

Bud Cauley WITB 2026 (June)

Published

16 hours ago

Jun 10, 2026

Will Schube

Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype

Grips: Golf Pride Tour Velvet Align

Ball: Titleist Pro V1

See more in-hand photos of Bud Cauley’s clubs here.

Equipment

Name every set of irons you’ve owned – GolfWRXers discuss

Published

16 hours ago

Jun 10, 2026

Will Schube

In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.

@Lamosteve began:

Can you name every set of irons you’ve owned? Here’s mine

Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6

Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”

Entire Thread: “Name every set of irons you’ve owned.”