Equipment
Spotted: New Wilson Dynapower drivers (3 models)
Wilson Golf has some new drivers out on tour for testing by the best players in the world. Its current Dynapwr drivers (Carbon and Titanium) were highly praised for being great performers. That might shock you, as Wilson is primarily viewed as an iron and wedge company, but it looks like the company is going to try to make a big push in the woods category.
Three different drivers were spotted at the 2024 RSM Classic this week, and all three look great with a traditional shape and great-looking designs to them. From what we can tell, it looks like they are going to be bringing a core model, something low spin, and a very forgiving option in 2025.
Dynapwr Carbon
This looks like it should be the core model that blends a good mix of distance, forgiveness, spin control, and distance. Two movable weights on the sole should be used for dialing in launch and spin along with the adjustable hosel. The majority of the sole is a carbon plate as is the crown so we should think there is a lot of perimeter weighting for stability on mishits. Not sure what “PKR-360” on the sole near the face means, but I would think it has something to do with a cup face or face technology that enhances ball speed.

Dynapwr LS
When we see “LS” printed on any wood it usually means low spin, and I would guess this is the case with this head. The first thing I noticed was the deep face on this model that again usually translates to lower launching and spinning drivers. This model has two movable weights on the sole but the rear weight is closer to the face compared to the Carbon model so it could be pushing that CG more forward. Carbon is used on the sole and crown here as well to move weight elsewhere in the head for higher performance.

Dynapwr Max
What should be the maximum forgiveness model that launches and spins the most out of the lineup. There is a single weight in the back of the club head that looks like you can adjust it for a draw, neutral, or fade. The sole and crown don’t have the same carbon look as the other drivers so this could be a full titanium head. Looking at the address photo it does seem like this would have the largest footprint and that makes sense in order to push maximum weight to the perimeter for forgivness and stability.

- Check out the rest of our photos from the 2024 RSM Classic
Equipment
Slab city on the Korn Ferry Tour — Lead Tape Report
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.





Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.






Whats in the Bag
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype


Grips: Golf Pride Tour Velvet Align
Ball: Titleist Pro V1
Equipment
Name every set of irons you’ve owned – GolfWRXers discuss
In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.
@Lamosteve began:
Can you name every set of irons you’ve owned? Here’s mine
Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6
Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
- JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
- jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News1 week agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag3 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch

Pingback: Wilson launches 2025 Dynapwr drivers – GolfWRX
Jack Ferrero
Nov 20, 2024 at 3:33 pm
I have tested them in Italy the day the casually I was into a shop and the distributor popped up to collect orders from the owner . I can say that the Carbon sits very well behind the ball giving a lot of confidence , the shape remembers the Mizuno STX family and with a Q link shaft numbers were good as the 2023 Dynapwr Driver . The LS had a strong fade tendency with the same shaft ( Q link blue stiff ) and I think is made for strong player with draw hook tendencies. I didn’t try the easy one . The distributor said that fairway wood will be made with carbon crow as well and will look like the drivers .
Benge
Nov 20, 2024 at 2:13 pm
There was a time when Wilson had some of the best. Maybe it’s time?
Paul
Nov 20, 2024 at 1:20 pm
I like the look. It looks like a serious club, not a toy like some of their drivers.
GW
Nov 19, 2024 at 11:00 pm
Good looking clubs!!!