Connect with us

Equipment

How Collin Morikawa found the putter that helped him lead the Memorial

Published

on

Editor’s note: We filed this piece for PGATour.com’s Equipment Report

Collin Morikawa jumped out to an early lead at the Memorial Tournament presented by Nationwide, doing so with a ‘new’ putter in the bag.

The 24-year-old has had a rough spell on the greens, finishing 2020 ranked 128th in Strokes Gained: Putting. He’s 180th in that statistic this season.

The Californian has been using a TaylorMade Spider FCG mallet-style putter, along with a ‘Saw’ grip he learned from Mark O’Meara, for much of this year, but in search of a change of fortunes on the greens, Morikawa has now switched back to a blade-style putter. He used a blade-style coming out of college and in last year’s win at Muirfield Village, at the Workday Charity Open. He added a SuperStroke grip and adjusted the loft on his blade this time.

But this isn’t your average story about a TOUR player switching putters. Morikawa settled on the putter after consulting TaylorMade’s online ordering portal that is available to everyone, from TOUR players to mere mortals. It paid off, as Morikawa shot a first-round 66 while gaining 1.8 strokes on the greens.

For more details on Morikawa’s switch, we spoke with TaylorMade’s Paul Demkowski, Principal Engineer, Product Development and TOUR Rep Todd Chew.

GolfWRX: In terms of MyTP, what did Collin see that he liked and why?

PD: Collin was checking out the options online and reached out to us with his specific needs for the head, the insert, alignment etc. What we built for him is similar to the one he was previously using – a TP Juno with a long neck and sightline on the topline.

The main difference is we machined the face to take loft away, 2 degrees to be exact. With his new setup he has his hands more forward. This allows us to then bend the shaft forward to get the loft he wants in a position where the face is square with hands forward. … If we don’t machine the loft away and simply bend the shaft forward for his new hand position the putter would have way too much loft on it.

Additionally, he commented on how much he likes the copper insert in his FCG putter. We do not have copper available for the TP putters, so we put a stainless steel insert into this putter for a harder feel.

So there are a couple of changes that were exclusive to him, but consumers can pretty much spec out 90% of his putter on our website.

Read the rest of the piece here. 

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

3 Comments

3 Comments

  1. Benny

    Jun 6, 2021 at 4:33 pm

    Thanks for the sales picth Tmag but we see right through this.

    • Logan

      Jun 7, 2021 at 3:06 pm

      hahaha seriously

    • America First

      Jun 7, 2021 at 4:13 pm

      What, you guys don’t believe in the TaylorMade CCP marketing program?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Slab city on the Korn Ferry Tour — Lead Tape Report

Published

on

This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.

Joel Thelen

Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.

First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.

Mitchell Meissner

Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed. 

Continue Reading

Whats in the Bag

Bud Cauley WITB 2026 (June)

Published

on

Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype

Grips: Golf Pride Tour Velvet Align

Ball: Titleist Pro V1

See more in-hand photos of Bud Cauley’s clubs here.

Continue Reading

Equipment

Name every set of irons you’ve owned – GolfWRXers discuss

Published

on

In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.

@Lamosteve began:

Can you name every set of irons you’ve owned? Here’s mine

Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6

Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
  • JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
  • jgrzask: “Tommy Armour 845u
    Mizuno MP-32
    Mizuno MP-33 (2 sets)
    Bridgestone J33cb – still own
    Srixon i-302 (2 sets) – still own
    Tourstage X-Blades – still own
    Mizuno Hot Metal – still own
    Nike Forged Blades – still own
    Titleist 714 AP1 – still own
    Cobra Forged SS – still own”

Entire Thread: “Name every set of irons you’ve owned.”

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending