Equipment
GolfWRX Spotted: TaylorMade SIM2 drivers on conforming list
The highly anticipated and buzz-creating TaylorMade SIM2 drivers are now officially on the R&A’s conforming list. (Expected soon on the USGA Conforming Club List). The Monday, December 14 list includes the new SIM2, and SIM2 Max, but there is no sign of a SIM2 Max D (Draw) version like there was from the 2020 line.
It could be TaylorMade is dropping the draw-biased model from the 2021 line, but there could be another explanation—and we’ll get to that in a minute.
We’re not 100 percent sure what this means for the launch date, but with the PNC Championship (formerly PNC Father-Son) taking place this week December 18-20th—featuring TaylorMade staffer Tiger Woods along with his son Charlie—it would be no surprise to potentially see it in play during this “silly season” charitable event.
TaylorMade SIM2 driver
What we know
It appears the SIM2 will continue to be the flagship model geared towards faster players based on the previous model designations. The noticeable omission right off the bat is the removal of the sliding weight track in favor of a weight screw positioned behind a through slot Speed Pocket. Around the weight it says “High MOI – LOW Spin.” This is interesting because nowhere on the previous SIM did it say anything about MOI, and this most likely means that these new TaylorMade drivers add extra stability to increase MOI.
The Speed Pocket on the sole is not a new technology, but this new pocket looks to be one of the widest TaylorMade has ever put on a driver.
Without the sliding weight, the next noticeable thing about the driver and the other SIM2 driver on the list is the amount of carbon used on the sole of the club. This weight saving must be TaylorMade’s way of removing mass from the middle of the head to reposition around to increase stability, with the final piece of the puzzle being what looks to be a larger weight for the inertia generator at the rear of the head.
Other mainstay technologies assumed to again be built into the new head include the Twist Face and Speed Injected Face to keep the SIM2 right to the max for CT (Characteristic of Time). The only unknown aspect of the sole is a small port visible on the toe—this could be where another adjustable weight screw is being used to boost MOI or it could have something to do with the Speed Injection system.
TaylorMade SIM2 Max driver
What we know
The SIM2 Max looks very similar to the standard SIM2 except for the front weight being slightly more heel biased to make the head easier to draw.
It’s hard to tell from the black and white USGA image, but the shaping of the head also looks to fall in line with the previous Max, and it could have a slightly taller face height.
Where is the SIM2 Max-D (Draw)?
As mentioned off the top there is no sign of a SIM2 Max D driver on the list yet, but it doesn’t mean there isn’t one on the way. The USGA list is intended for competition and it is less likely there would be any players who currently have any plans to put it into play and thus TaylorMade has no desire to submit a draw driver.
Conclusion
With the huge success of the 2020 SIM driver line, TaylorMade is sticking with a proven formula of shape and design characteristics. If there is one thing engineers and designers know, it’s not to mess with a good thing and the 2020 drivers were very good.
To see what other golfers are saying check out the GolfWRX forums.
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.
From the listing:
(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.
(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.
Driver: Callaway Quantum Triple Diamond (9 degrees)
Shaft: Project X HZRDUS Smoke Blue RDX 60 TX
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Project X HZRDUS T1100 70 6.5
5-wood: TaylorMade SIM2 Max (18 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 80 TX
Irons: Srixon ZXiU (23 degrees), Srixon Z785 MB (5-PW)
Shafts: Project X HZRDUS Smoke Black RDX 100 6.5 (4), KBS Tour 130 X
Wedges: Titleist Vokey Design SM11 (50-08F, 54-10S, 58-04T @59)
Shafts: KBS Tour 130 X
Putter: Odyssey Dual Force Rossie II
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.
Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
What’s the story behind Webb Simpson’s custom-stamped irons?
Memorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Best irons 2026: Best irons overall, most forgiving irons, and more
J.T. Poston’s winning WITB: 2026 Memorial Tournament
Aaron Rai’s winning WITB: 2026 PGA Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Ryan Palmer WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees) Shaft: Project X HZRDUS Smoke Blue RDX 60 TX 3-wood: TaylorMade Qi10 (15 degrees) Shaft:...
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament. Driver: Titleist GTS2 (8 degrees) Shaft: Fujikura...
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting) Shaft: Mitsubishi Chemical Diamana RB 53 S 3-wood: Titleist GT3 (15 degrees,...
Asterisk Talley WITB 2026 (June)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Blue 6 S 3-wood: TaylorMade Qi4D (16.5 degrees) Shaft: Fujikura Ventus Blue...
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
Pingback: GolfWRX Spotted: TaylorMade SIM2 fairway woods and hybrids on conforming list – GolfWRX
Brandon
Dec 14, 2020 at 7:38 pm
Just glad they got rid of the shiny part on the fin.
Carolyn
Dec 14, 2020 at 4:34 pm
If your going to improve the driver every year maybe it is time to start offering one or two year leases on there clubs? Buying one means you pay $500 and 18 months later one round or a hundred the club is worth $98 cash or maybe $130 max on trade in. Be nice if they just charged $250 for use of the club and let you trade in in and get the next years model for another $250 we would all be ahead with that…
Craig
Dec 14, 2020 at 11:30 pm
There are shops that will do this. This is an Australian one, but I am sure there are similar elsewhere https://www.golfbox.com.au/golf-blog/golfrent-get-your-golf-gear-now/
Paulo
Dec 14, 2020 at 4:02 pm
The blue colour scheme is truly horrid on the actual retail model
Gunter Eisenberg
Dec 14, 2020 at 12:52 pm
Same old…same old…
SnotsaJerk
Dec 14, 2020 at 11:07 am
Buy the newest, bestest, and longest from the company that Needs to continue pay for play through minimal progress releases. I suggest some of us go play as a walk on and feel that “moneys worth” feeling of being “that’s You next”, multiple yards behind a Srixon, Tour Edge, or Titleist.I Love my SIM Dr, 3wd and Hy, first ever matching woods for me. My heads and covers are already painted over “custom” so B&W won’t sell me. If You still need 5 more yards You better find Yoga or Martial Arts, which You can do with Your families for a better value!!!
JP
Dec 14, 2020 at 9:49 am
Why don’t they just make a TP version. That would make a lot of golfers go crazy over it. Literally, offer a little smaller head with a TX shaft and put the TP stamp on the toe. Instant sales
gwelfgulfer
Dec 14, 2020 at 10:34 am
Because it was only the shaft that really made the old TP lines a bit better, heads were the same. So no point in todays day and age when everyone has shafts to swap out.
Travis
Dec 14, 2020 at 9:23 am
They look good in black and white, but wait until the public sees what the actual color scheme is. It’s horrendous… although European golfers might be happy =P
Bill Bogle Jr.
Dec 14, 2020 at 9:11 am
The back of the club is aluminum with a weight that Taylormade can swap out, not the consumer. Special screw. It will be interesting to see how durable the carbon fiber on the sole is when it it this prevalent. TM had some cracking with the M3&M4. It looks like the sliding weight has become a thing of the past with both Callaway and Taylormade moving on. Only fixed position changeable weights remain with TSi and G425.
matt
Dec 14, 2020 at 9:09 am
forged aluminum is the only thing i can see that’s a bit different. besides going with a crap ton of carbon on the sole, but that’s been done. isn’t this supposed to be a massive release? I mean you hear that constantly but from guys like Ian Fraser on TXG it carries a little extra weight.