Equipment
It might be a good idea to cut down your driver
There are a lot of ways to adjust your clubs at home with some simple tools, and one of the easiest jobs for the DIY golfer is cutting down clubs, especially cutting down a driver, and installing a new grip.
Cutting down a driver will have a number of impacts including making the driver more accurate because at a shorter length it is easier to control and make contact in the middle of the face.
PGA Tour driver length
Bryson DeChambeau testing a longer driver
On the PGA Tour, the average driver length is 45″, even though some golfers like Bryson DeChambeau with a Cobra SpeedZone and Adam Scott with a Titleist TSi4 *Prototype, have recently experimented with drivers close to the 48″ USGA limit to help pick up extra speed. Even Phil Mickelson has transitioned to a 47.5″ driver for extra speed, and has been using it on the Champions Tour and recently at The Match 3.
The longer driver theory works well for stronger and highly skilled players because of their ability to control a longer and heavier club at higher speeds, but for average golfers and most recreational players, this extra length means bigger misses and doesn’t always lead to extra speed—this is why playing a shorter length can help most golfers.
More on PGA Tour driver length: PGATour.com – Are long drivers here to stay?
Buying a new Driver
If you are buying a new driver, you can custom order any length you want through your retailer and the driver will be adjusted before final assembly. If you are buying a “stock” driver, most in the marketplace are now between 45.5″ and 46″ and many golfers struggle to control the club at those lengths. This is why many golfers choose to cut down their stock driver after purchase between 1″ and 1.5″.
What happens when you cut down a driver
When you cut down any club, especially a driver, it will feel lighter without any adjustment because you have moved the mass of the club closer to your hands. Just like a fulcrum scale used to measure mass, the closer the mass—in this case, the driver’s head gets to the fulcrum of the scale, the lighter it will “feel” to the golfer—this is called swing weight.
Thanks to adjustable drivers, it is easy to get extra weights from a manufacturer to help the driver feel the same before it was cut down, and as a general rule, for every 1″ you cut, you have to replace 12g back into the head,
To get an idea of what swing weight is, check out the video below that covers the subject.
TXG Driver length test
To see a shorter driver put to the test, check out the video by the team at TXG, where they compare a standard length 45″ driver to a 43″ driver and how they compare for distance and accuracy.
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.
Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX
7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX
Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue
Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype
Grips: Golf Pride Tour Velvet Align
Ball: Titleist Pro V1
In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.
@Lamosteve began:
Can you name every set of irons you’ve owned? Here’s mine
Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6
Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
- JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
- jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
What’s the story behind Webb Simpson’s custom-stamped irons?
Memorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Best irons 2026: Best irons overall, most forgiving irons, and more
J.T. Poston’s winning WITB: 2026 Memorial Tournament
Aaron Rai’s winning WITB: 2026 PGA Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament. Driver: Titleist GTS2 (8 degrees) Shaft: Fujikura...
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting) Shaft: Mitsubishi Chemical Diamana RB 53 S 3-wood: Titleist GT3 (15 degrees,...
Asterisk Talley WITB 2026 (June)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Blue 6 S 3-wood: TaylorMade Qi4D (16.5 degrees) Shaft: Fujikura Ventus Blue...
Brianna Do WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees) Shaft: KBS PGW 3-wood: Callaway Elyte Titanium (15 degrees) Shaft: KBS PGW 5-wood:...
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
Colin
Feb 19, 2021 at 4:11 pm
I’m still working on what suits me best but, a purple ice shaft 65gms stiff works better than regular. I like to feel the head so changed from weight from 2 to 8gms, but still a work in progress lol
Rick James
Dec 20, 2020 at 9:47 pm
Having spent time w/ Launch Monitor outputs I realized neutral face to path w/ driver is where its all at and I could do that w/ shorter lengths. I found better zones of contact on the face too w/ shorter lengths too that helped reduce spin. I tried to use 2.51 yds per MPH of clubhead speed to gauge if the length was giving me efficient results. I found shorter length was consistent.
PSG
Dec 10, 2020 at 9:41 am
This article is fine, except for the part where you say a player might not pick up extra speed.
Every half-inch is worth around 1.5 mph, for everyone. They might not pick up distance (because they don’t hit the middle) but every single human on earth swings a 48″ lever faster than a 45″ lever. That part is a little misleading.
Jay
Dec 10, 2020 at 11:32 pm
I think they mean ball speed.
Ndhd
Dec 20, 2020 at 1:34 pm
This
Ryan Hurley
Dec 9, 2020 at 2:37 pm
I work as a club fitter and see so many people come in with the notion they need longer drivers to match their longer irons
Griff
Dec 8, 2020 at 10:52 am
I went from a M3 at 45.75 to an Epic sub zero cut -1 inch to 44.5 and I hit it better than any driver I’ve ever had. Hitting it in the sweet spot more often…I’m longer and more accurate. Gone from a 8 to a 5 handicap. Distance is not the issue for me…squeezing another 10 yards out of a driver is irrelevant b/c most of the time I’m hitting some type of wedge into the green. If I’m in play I’m going to score well. I’ve always struggled with driver consistency and cutting it shorter has really changed things without any performance drop off.
JK
Dec 7, 2020 at 8:59 pm
Yup – cut down my Cobra F9 driver to play 44 5/8. added some swing weight to get it to D1 & drove the ball better this year than last 5 years.
Imafitter
Dec 7, 2020 at 6:02 pm
LOL! I’ve been advocating this for years, and before I just retired from fitting, I had every customer, especially seniors, try shorter shafts. My Ping G400MAX comes standard with a 45.75″ shaft & D3, and when I was fitted by Ping at the PGA Show, they recommended 45″, which I ordered. This summer for fun I replaced the shaft with a Mits Diamana at 44″ and experimented with the weight which is now D0. Not only am I hitting it straighter, but longer than most of my senior league (and the 45″ shaft)! Others have hit my driver and done the same or similar adjustments. Amateurs need to get fit, quit buying off the rack, and experiment with different lengths.
Trent Walden
Feb 15, 2024 at 8:32 am
What about just choking down a little bit on your shaft?
Martin
Dec 7, 2020 at 5:39 pm
Its wrong. Its not 12 grams per inch. Its actually 1.6 gram per swing weight. Does it matter? Yes, to some it does, cause we are all different and some of us are extremely sensitive to even the slightest weight difference. So if you cut down a driver 1 inch you the swing weight becomes 6 weights lighter, so to figure out how many grams you need to add you need 6×1.6 grams added to the head of the driver.
Ted Noel
Jan 11, 2021 at 9:49 am
Actually, we aren’t sensitive to “swing weight.” We are sensitive to “Dynamic Moment of Inertia.” SW is only the functional equivalent of DMOI at identical club lengths. That means if you test 6-irons and find the one you like, your progressive length set will feel best at the 6-iron, and all the rest will feel less good. That’s because to keep DMOI the same through the irons, you need to change head weight by about 9 grams per 1/2 inch change in length. To keep SW the same, the change is about 7 grams per 1/2 inch. This is another reason single length irons work so well. They all feel the same, just like Bobby Jones’ clubs.
Ultimately, the best measurement point for DMOI is from about 4″ from the butt end, which puts it between your hands, which is the physical hinge point. Using that point, I can match your entire set so that you won’t be able to tell which club you are swinging blindfolded.
Issues of flex and torque are separate concerns from DMOI and SW.
Mike C
Dec 6, 2020 at 6:02 am
By 2022 half the players on the PGA tour will be using a driver between 47”-48” long. Eventually 47 1/2 inches will be the standard on tour and for off the rack purchases. I’m currently experimenting with a 48 inch Krank driver. So far so good.
phizzy
Jan 5, 2021 at 5:50 pm
I’d like to see how straight you hit that driver, lol
Charles Mclaughlin
Dec 6, 2020 at 1:34 am
You can also grip your club an inch or two lower.
Jay
Dec 10, 2020 at 11:37 pm
The problem with gripping down is you change the swing weight dramatically. When cutting down a driver, you want to restore the SW to your optimal.
Tyler Durden
Dec 5, 2020 at 1:45 pm
Just cutting off some length off the butt of your driver is a good way to ruin a club
Alan Garner
Dec 7, 2020 at 3:57 pm
Agreed, gripping down is a far safer and prsctical way. I do this on tight fairways and when hitting into the wind. Then you have the option to grip back up when the fairway is wide open and there is little trouble to give the ball maximum pencil! #bombs
Tyler Durden
Dec 8, 2020 at 4:22 pm
Exactly. I once had a GBB 8 degree driver with a aldila Longwood shaft at 47.5”. I could crank drives out at the full length, and found that I could grip down to the grip end and be more consistent than with my 3 wood. In my infinite wisdom, I was choking down pretty much every tee shot, so I decided to just cut off an inch. Long story short, totally ruined the feel of the driver, and two more purchases of the longwood shaft didn’t recreate the original feel.