Equipment
Best driver under $100
Look, we get it, golf clubs, more specifically new drivers, can be expensive. Once you factor in the potential cost of a fitting and or other shaft options you could be looking at a single club that retails for close to $1,000—that’s a lot of dough! That’s why we want to help show you what you can get for your money with the best driver under $100.

As much as we love new clubs and new technology, at GolfWRX we still love to find the best deals to help golfers get the most value and when it comes to clubs and in this case drivers. There is a lot of value in the marketplace if you know where to look, so we did the looking for you and have assembled the best drivers you can find under $100.
** Note: Used club prices fluctuate and the clubs selected for this list we’re easily located in good shape for under the stated $100 price point **
Best driver under $100
Taylormade Jet Speed

As far as marketing a driver goes, I don’t think anyone has still quite figured out how or why tour player puppet look-a-likes was a great idea, but the Jet Speed driver itself was actually a really good driver that offered adjustability and mid to lower spin in a forgiving design. The best part about the JetSpeed is the current TaylorMade adapter is still compatible, so if you happen to have a few shafts kicking around you can even do some testing.
Adams XTD
![]()
The XTD was the last “premium line” driver ever produced by Adams golf, and it benefits from the fact that by this time TaylorMade had purchased the Plano, Texas-based company and it was using the same adapter tip as the current crop of TaylorMade drivers.
It was designed to produced right to the limit CT/CoR numbers, thanks in part to slots placed both on the sole but also on the crown, and because of this design, it was a bit of an acquired taste for some golfers. If you can get past the looks from address, you will have yourself a driver that keeps up to almost anything.
Titleist 910

The Titleist 910 is another driver that benefits from being older, while still using the same type of adapter as the modern models. It came in two versions; the 910D2 which was shallower and more forgiving, and the 910D3 which is a more traditional pear shape with a taller face that offers lower spin.
Both versions of the driver can be found in nice shape for under $100, and if you take some time to look around, you can find quite a few with aftermarket shafts that make this best driver under $100 seem like a complete bargain.
Cleveland Launcher DST – Distance Sub Three hundred

The Cleveland Launcher DST drivers could be one of the best all-around options when it comes to a driver for under $100.
Like others on this list, the Launcher DST came in a couple of options; a standard model and a “tour” version featuring a lower spinning fade biased head design. For the stronger players that prefer a fixed hosel, the DST Tour came stock with a Miyazaki Kusala Black which in the aftermarket would cost around $300 on its own!
GolfWRXers discussed the best driver under $100 back in 2018 in the forums. See what they said.
Equipment
Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory
In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.
McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.
So, with that, why not compare his current setup to the clubs he used to break all the records?
Driver
2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.
What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)
The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.
Fairway woods
2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.
Irons
2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.
With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.
Wedges
2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.
Putter
2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.
Ball
2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)
As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.
Grips
2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC
Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.
Equipment
From the GolfWRX Classifieds: Titleist Vokey Proto Wedges 54M, 60T
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.

From the listing:
(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.
(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.
Whats in the Bag
Ryan Palmer WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees)
Shaft: Project X HZRDUS Smoke Blue RDX 60 TX

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Project X HZRDUS T1100 70 6.5

5-wood: TaylorMade SIM2 Max (18 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 80 TX

Irons: Srixon ZXiU (23 degrees), Srixon Z785 MB (5-PW)
Shafts: Project X HZRDUS Smoke Black RDX 100 6.5 (4), KBS Tour 130 X

Wedges: Titleist Vokey Design SM11 (50-08F, 54-10S, 58-04T @59)
Shafts: KBS Tour 130 X

Putter: Odyssey Dual Force Rossie II

Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch

Jono
Nov 3, 2020 at 4:22 pm
RBZ tour
Speedy
Nov 1, 2020 at 4:58 pm
Callaway XR driver.
Jbone
Oct 31, 2020 at 8:36 pm
905S>>>>
G25 fairway>>>>>
Matt
Oct 31, 2020 at 6:05 pm
Ping Anser is hands down the best under $100 and it might be under $50. Still out plays my Mavrik and G410.
F Couples
Oct 31, 2020 at 2:52 pm
Bridgestone J33r
Jason
Oct 30, 2020 at 9:15 pm
I bought a used Jet Speed in VGC for $60. It was good, but adjustable drivers just feel head heavy to me. I bought a new Aeroburner on eBay for $125. It feels great. But, if you can find one in good shape, the TaylorMade Burner 2007 driver is one of the best ever, imo.
Brandon
Oct 30, 2020 at 6:43 pm
I got a brand new Cobra LTD Pro for 99 bucks from golf etail about 2 years ago. Still the best deal on golf equipment I’ve ever seen. To bad I let a buddy use it and now it has the worst sky marks you can imagine.