Equipment
What GolfWRXers are saying about ditching their driver for a strong 3-wood
In our forums, our members have been discussing the merit of dropping their driver in favor of a strong 3-wood. Struggling with consistency with the big stick, WRXer ‘grisham’ says his accuracy off the tee has improved dramatically by using a strong 3-wood and asks have any fellow members taken the same approach.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- Myherobobhope: “I’ve tinkered with ideas like this… but I think having a driver in the bag and confidence with it on the course is important to shooting your best possible score. It might be a 44-inch 13-degree driver… but I think you need to find a way to maximize length while minimizing risk. Step one is getting the ball in play, and step 2 is hitting the ball as far as possible while managing step 1…”
- BMC: “Swing speed plays a big role. Sub 95 mph, go with 44 inch/ 14*. Could be labeled a 3 wood or driver. Swing shape plays a role too. I use an OG Rapture 3 wood and can hit a high draw with it for max distance.”
- Newgs: “I go back and forth between my 3w and my driver as my top club. One thing I have noticed is I get in a lot less trouble with my 3w than with my driver, and that makes my round a lot more fun. What distance I lose, which isn’t much, is made up easily with more fairways instead of rough or worse. My thing is I tend to over swing with my driver, which, as noted above, is more between the ears than anything else. Go with what works for you at the end of the day though.”
- bubbagump: “I’ve been rocking a SLDR mini since it came out, and have zero regrets in using it as my main tee club. I do agree, that even if you mash it and are within say 10-15y of your driver you are leaving likely at least 1 club out there each hole which can add up fast, but accuracy can never hurt either, and if you are comfortable with some longer approaches in some cases, it equals out. I used the mini almost exclusively off the tee because most the courses I played it was all I needed but when I would play longer holes or courses the difference of a driver could really be handy. I really began to work on driver, and get it into shape, and now I am comfortable pulling it but still use the mini often as course management requires it the better club. I have kept the mini in also because I use it as a 3w, so I hit it both off the deck and tee, so its not just a boutique luxury club taking a spot in the bag. If you can find your way around most courses with a strong 3w, 2w or mini I would say go for it and see how it works for you.”
Equipment
From the GolfWRX Classifieds: Titleist Vokey Proto Wedges 54M, 60T
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.

From the listing:
(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.
(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.
Whats in the Bag
Ryan Palmer WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees)
Shaft: Project X HZRDUS Smoke Blue RDX 60 TX

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Project X HZRDUS T1100 70 6.5

5-wood: TaylorMade SIM2 Max (18 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 80 TX

Irons: Srixon ZXiU (23 degrees), Srixon Z785 MB (5-PW)
Shafts: Project X HZRDUS Smoke Black RDX 100 6.5 (4), KBS Tour 130 X

Wedges: Titleist Vokey Design SM11 (50-08F, 54-10S, 58-04T @59)
Shafts: KBS Tour 130 X

Putter: Odyssey Dual Force Rossie II

Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet
Equipment
Slab city on the Korn Ferry Tour — Lead Tape Report
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.





Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.






-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch

Scans
May 23, 2020 at 3:45 pm
I made the switch to a Taylormade Burner at 13.5* stiff shaft in 2008. I have been the best driver in my group since. It occurred to me that every time I got on a tight hole I pulled a 3 wood. Why not try a high lofted driver. It works great for me. My club is a tree lined tight driving course. Finding the fairway is required to score well. Far easier to hit than the 10.5* driver I had. Just switched to a Taylormade M6 at 12* adjusted to 13.5*. Honestly not sure it’s any better than my 2008 Burner but both are much easier than lowers lofted drivers. Give it a try.
15th Club
May 23, 2020 at 12:38 pm
I am as anti-driver as anybody. And I am sympathetic to this idea. But I wouldn’t drop driver from my 14-club set. (Driver is the first club tossed out when I walk with a Sunday bag and 7 or 8 clubs.)
Rather, I’d keep thedriver, and a strong 3w, and a fw, but adjust my long iron lifts to widen the loft gaps and drop the 3-, 4-, or 5-iron. Or else limit my wedges.