Equipment

What GolfWRXers are saying about the best clubs to buy for a total beginner

Published

6 years ago

May 8, 2020

In our forums, new WRXer ‘XaN91’ (welcome to the WRX family!) created a thread dedicated to clubs suitable for someone just taking up the sport. ‘XaN91’ says:

“I am very interested in starting up golf and was wondering if you guys had any recommendations for clubs. My only experience with golf has been Top Golf and a par 3 course at McMenamins Edgefield while inebriated.

I have been looking at a lot of different brands, and it is quite overwhelming. Which clubs do I actually need when starting out?

My budget is $1000, the less I have to spend the better.”

And our members have been sharing their thoughts on the best ways to go for a total beginner.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

scooterhd2: “I’d be looking at a used set of irons online. You can get some decent irons for under 250 bucks. Driver, 5 wood, 5-gw iron set, and then a 56* SW and you are set.”
James the Hogan Fan: “If I were you, I would go down to the thrift shop and look for clubs there. Irons generally come in two kinds: Cavity back and Muscle back/blade. The cavity back is meant to be more forgiving and easier to hit, and as there were many models of them released in the 1990s, thrift shops are usually populated with them. Look at clubs like Callaway X14, or Ping Eye/Zing. Clubs that look like this are going to be more reasonable for a beginner compared to something like ‘Hogan Apex ’88’ (A blade type). This is simply mentioned as an alternative to the box sets above. It depends on what you’re looking for and price. Top of the line 25 years ago vs discount rack today. Just remember at this point in our golfing, you probably will be very frustrated with bad contact no matter what clubs you have and use. Wristy Swing has really summed up the goals and expectations well.”
Mr Smooth: “Tour Edge makes decent intro-level clubs. For example, Tour Edge Bazooka 470 Black complete set, which includes a bag, can be had for under $500 new.”
Stinger83: “Start as cheap as possible. My advice is buy old equipment on eBay and local small golf shops. Old equipment is 90% as good as brand new stuff, and it’s 10% of the price. The reason I recommend this is because once you improve – and decide you enjoy the game – you’re going to want new stuff. Your swing will change, and you’ll be spending another $1,000 on new irons within a year. I’d say buy an old set of irons, a driver, a hybrid, a putter, and a sand wedge and you’re good to go.”
jomatty: “I’d get an older set of Titleist AP1’s, Mizuno jpx or ez, Callaway steelheads. Get 5-s if you can. You can get some of those irons for $250ish. Get a 23 degree Adams hybrid for 30 bucks or so (plenty of good options but tough to beat price on some of the Adams hybrids). An odyssey putter $40. A Callaway ft-9 driver or ping g2 driver something like that will cost you maybe another $40. Maybe a 3 or 5 wood, something like a g2 for 30 bucks or so. You’re done for less than $500. As I add that up, I guess the Callaway edge complete set at the same price looks really good.”

Entire Thread: “Best clubs for a total beginner”

Whats in the Bag

Christiaan Maas WITB 2026 (June)

Published

7 hours ago

Jun 11, 2026

GolfWRX Staff

Driver: TaylorMade Qi4D LS (8 degrees)
Shaft: Fujikura Ventus TR Blue 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 9 TX

Irons: TaylorMade P770 (3), TaylorMade P7CB (4), TaylorMade P7TW (5-PW)
Shafts: Fujikura Ventus Black HB 10 X, True Temper Dynamic Gold X100

Wedges: TaylorMade Prototype (50-SB09), TaylorMade MG5 (56-HB12, 60-LV07)
Shafts: True Temper Dynamic Gold S400

Putter: TaylorMade TP Juno

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Cord

Check out more in-hand photos of Christiaan Maas’ clubs here.

Equipment

TaylorMade MySpider Tour and Tour X: More customizable build options now available

Published

7 hours ago

Jun 11, 2026

Alistair Cameron

TaylorMade Golf’s MySpider program underwent a substantial overhaul over the last month. Firstly, the company launched the option to customize the Spider ZT model, and now the program has returned with the MySpider Tour and MySpider Tour X.

The revamped page now gives golfers complete control over every visual and functional detail of their putter on the popular Tour and Tour X head, with every cosmetic idea thought of. In MySpider Tour, golfers can choose from four head finishes, 16 paint fill colors, nine Surlyn face insert colors, three aluminum insert options, six sightline configurations, and four hosel options — L-neck, small slant, double bend, center shaft. Six sightline options are available in MySpider Tour, including the optically engineered True Path alignment system. MySpider Tour X gives builders the option of four head finishes, four hosel configurations, and five sightline options, also including True Path alignment.

One of the more interesting features of the new MySpider program is the availability of three distinct face insert options. Along with the usual Surlyn Pure Roll insert trusted by Scottie Scheffler and Rory McIlroy, which can be customized from nine colors, golfers can now also select firmer options. Two are offered with the black aluminum Pure Roll insert, slightly firmer than the traditional insert, or for the firmest feel, golfers can choose from two colors of milled aluminum inserts.

Another fun addition to the MySpider Tour is the ability to use the “Tommy Sightline.” The custom alignment aid design, which was first drawn onto Tommy Fleetwood’s putter by PGA Tour Rep James Holley, is based on the milled sightline on his Spider ZT head. There are five shorter lines on the left and right of a longer central line serving as the traditional short line alignment aid.

See below for the full specifications sheet for MySpider Tour and Tour X:

MySpider Tour

MySpider Tour X

Equipment

Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory

Published

10 hours ago

Jun 11, 2026

Alistair Cameron

In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.

McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.

So, with that, why not compare his current setup to the clubs he used to break all the records?

Driver

2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.

What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)

The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.

Fairway woods

2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.

Irons

2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.

With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.

Wedges

2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.

Putter

2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.

Ball

2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)

As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.

Grips

2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC

Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.