Connect with us

Equipment

What GolfWRXers are saying about finding the perfect grip size

Published

on

In our forums, our members have been discussing grip sizes after WRXer ‘golfpros1’ dedicated a thread to find out how to determine the perfect size for your game. ‘Golfpros1’ asks:

  • “How did folks determine the grip size and/or the number of wraps they decided to use?
  • Do you just keep experimenting until you think it feels good… 3 regrips later (ouch)?
  • Do you use your golf glove size as a guide as just go with it?
  • Do you measure you hand and fingers and determine a grip size via a generic chart?
  • Did you just grab the club off the rack and think, sure, that works?
  • How did you pick your grip size and/or # of wraps?”

And our members have been giving their experience and advice on how fellow WRXers can find the ideal grip size for those struggling with the issue.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Hawkeye77: “Had standard-sized grips for decades. Tried mid-size once just to try – only cost me two grips on a couple of irons to experiment – no good. Eventually settled on two extra wraps under the right hand, again, tried it but not on a full set and that’s what I’ve done now for many years. Easy to find grips at some golf stores these days and get a feel for sizes. Then it’s like the three bears – know when it’s just right.”
  • mjguzik: “Started with what came with the club 10 years ago. After having them regripped and dropping a few dollars figured this can’t be hard. YouTube to the rescue. Settled on 0.580 on 0.600 shafts for several years after trying on two clubs for a bit. Went to mcc plus 4 on my irons last year and not looking back. Still, .58 on .60 shafts for woods unless the shaft is a little larger then pull it 0.75 inches longer. Trial and error until you like it.”
  • DaRiz: “Regripping is the easiest clubmaking thing you can do from home, I have always had a bunch of grips and tape lying around. I always thought standard was too thin and midsize was too fat. I just added layers until I got what I like.. +3 on wedges, +2 on everything else. I can see how it would be difficult to experiment if you are paying someone $10 to regrip plus $10 a grip.”
  • LeoLeo99: “Some of my clubs are midsize, and some are regular. I feel like I have more control with the midsize but more swing speed with the regular size. Don’t think it makes that much of a difference to my scores.”
  • G410Plus: “Blow the grip on with your compressor, try it, if you like it leave it, if not blow it off, adjust the tape and blow it back on. That is what I did to determine my optimal size.”

Entire Thread: “How did you determine your grip size?”

Gianni is the Managing Editor at GolfWRX. He can be contacted at [email protected]

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

From the GolfWRX Classifieds: Titleist Vokey Proto Wedges 54M, 60T

Published

on

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.

From the listing:

(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.

Continue Reading

Whats in the Bag

Ryan Palmer WITB 2026 (June)

Published

on

Driver: Callaway Quantum Triple Diamond (9 degrees)
Shaft: Project X HZRDUS Smoke Blue RDX 60 TX

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Project X HZRDUS T1100 70 6.5

5-wood: TaylorMade SIM2 Max (18 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 80 TX

Irons: Srixon ZXiU (23 degrees), Srixon Z785 MB (5-PW)
Shafts: Project X HZRDUS Smoke Black RDX 100 6.5 (4), KBS Tour 130 X

Wedges: Titleist Vokey Design SM11 (50-08F, 54-10S, 58-04T @59)
Shafts: KBS Tour 130 X

Putter: Odyssey Dual Force Rossie II

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet

Check out more in-hand photos of Ryan Palmer’s clubs here.

Continue Reading

Equipment

Slab city on the Korn Ferry Tour — Lead Tape Report

Published

on

This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.

Joel Thelen

Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.

First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.

Mitchell Meissner

Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed. 

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending