Equipment

BGT launches all-new Stability Tour putter shaft

Published

7 years ago

Nov 23, 2019

Breakthrough Golf Technology (BGT) hit a home run with the introduction of the original Stability Putter shaft. Now, to build on that success it is introducing the Stability Tour which offers the same massive boost in putter performance, with improved feel and looks.

Stability Shaft Technology Recap

The principle behind the BGT Stability Shaft is that by increasing the stiffness and reducing the torque of the putter shaft you reduce club head twisting and greatly increase putts made percentage, especially on mishits. Of course, using a higher MOI putter design helps with that, but there is still an inherent flaw—what happens when you’re using 2019 putter technology with 1950s steel shaft technology? Less than ideal results.

We featured the original BGT Stability on GolfWRX earlier this year when I had the chance to do a fitting with VP of R&D Blair Philip (BGT’s Stability putter shaft: Real numbers, real improvement). As someone with experience using the Quintic Putting fitting system and the information it produces, I was extremely impressed with the performance benefits the Stability Shaft offered me.

So where does the new Stability Tour improve vs the original Stability? By taking player feedback from the original and tweaking the design to offer the same technological advantage and putting it into a more player-preferred package.

The Tour Difference

As much as the original is loved by those who put it into play, the biggest deterrent that kept golfers from making the switch was the looks—and BGT took on the challenge to improve it!

BGT Tour Shaft

The original Stability had a consistent diameter of .600″ all the way from the shaft transition adapter to the butt end. .600″ is the standard butt diameter for must shafts on the market including irons and driver shafts, but having the .600″ run the entire length makes the shaft appear oversized compared to standard putter shafts and creates a very noticeable transition from the graphite portion to the steel at the bottom.

The new Stability Tour has a slow consistent outside diameter taper from .600″ at the butt to just over .520″ at the tip, .080″ might not seem like a big difference, until you understand just how sensitive the human eye is to detecting measurements and recognizing parallel lines. This small change makes a huge difference to how the shaft appears at address.

With this change in the specs of the outside diameter, a lot of other things had to change on the inside too. The construction of the Original shaft and its four parts can be seen below:

The new Stability Tour uses 30 percent more graphite to reinforce the shaft and no longer uses the aluminum insert to create the extra rigidity. When talking with Blair Philip about the construction of the Stability Tour, the new shaft is actually stiffer and stronger than the previous versions but offers better feel, and here’s how

Graphite wall thickness: By increasing the wall thickness of the Tour, it reduces the acoustic vibration potential and makes it sound and feel softer. Think if a crash symbol vs a solid block of steel—it’s an extreme example but the symbol is going to be a lot louder when hit with the same force because it’s thinner and has the potential of vibrate more. You add in the inherent vibration dampening properties of the material (graphite) itself, and you have a shaft that sounds softer, feels better, and keeps the ball online more often.

Balance point: The other element for feel is the balance point of the shaft. The new Stability offers a balance point much more inline with a traditional steel shaft vs. the original Stability. This means that for players used to a specific weight feel (swing weight) of their putter before re-shafting, this can eliminate one variable for the converting player.

Per BGT: “It will balance like a steel shaft which makes it easy to recreate a specific swing weight when re-shafting. Better golfers can replace their steel shaft without changing the balance of the putter, which allows the most discerning players to achieve precise specifications on their equipment.”

When all of these changes are combined together into the new Stability Tour putter shaft, you get the same benefits of the original in a smaller, sleeker, player-preferred package.

For more information check out BGT’s Website: BreakThroughGolfTech.com, and you can see what our members are saying in the GolfWRX Member testing thread here: BGT Stability Tour, GolfWRX Member Testing Thread

Whats in the Bag

Christiaan Maas WITB 2026 (June)

Published

1 hour ago

Jun 11, 2026

GolfWRX Staff

Driver: TaylorMade Qi4D LS (8 degrees)
Shaft: Fujikura Ventus TR Blue 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 9 TX

Irons: TaylorMade P770 (3), TaylorMade P7CB (4), TaylorMade P7TW (5-PW)
Shafts: Fujikura Ventus Black HB 10 X, True Temper Dynamic Gold X100

Wedges: TaylorMade Prototype (50-SB09), TaylorMade MG5 (56-HB12, 60-LV07)
Shafts: True Temper Dynamic Gold S400

Putter: TaylorMade TP Juno

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Cord

Check out more in-hand photos of Christiaan Maas’ clubs here.

Equipment

TaylorMade MySpider Tour and Tour X: More customizable build options now available

Published

1 hour ago

Jun 11, 2026

Alistair Cameron

TaylorMade Golf’s MySpider program underwent a substantial overhaul over the last month. Firstly, the company launched the option to customize the Spider ZT model, and now the program has returned with the MySpider Tour and MySpider Tour X.

The revamped page now gives golfers complete control over every visual and functional detail of their putter on the popular Tour and Tour X head, with every cosmetic idea thought of. In MySpider Tour, golfers can choose from four head finishes, 16 paint fill colors, nine Surlyn face insert colors, three aluminum insert options, six sightline configurations, and four hosel options — L-neck, small slant, double bend, center shaft. Six sightline options are available in MySpider Tour, including the optically engineered True Path alignment system. MySpider Tour X gives builders the option of four head finishes, four hosel configurations, and five sightline options, also including True Path alignment.

One of the more interesting features of the new MySpider program is the availability of three distinct face insert options. Along with the usual Surlyn Pure Roll insert trusted by Scottie Scheffler and Rory McIlroy, which can be customized from nine colors, golfers can now also select firmer options. Two are offered with the black aluminum Pure Roll insert, slightly firmer than the traditional insert, or for the firmest feel, golfers can choose from two colors of milled aluminum inserts.

Another fun addition to the MySpider Tour is the ability to use the “Tommy Sightline.” The custom alignment aid design, which was first drawn onto Tommy Fleetwood’s putter by PGA Tour Rep James Holley, is based on the milled sightline on his Spider ZT head. There are five shorter lines on the left and right of a longer central line serving as the traditional short line alignment aid.

See below for the full specifications sheet for MySpider Tour and Tour X:

MySpider Tour

MySpider Tour X

Equipment

Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory

Published

4 hours ago

Jun 11, 2026

Alistair Cameron

In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.

McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.

So, with that, why not compare his current setup to the clubs he used to break all the records?

Driver

2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.

What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)

The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.

Fairway woods

2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.

Irons

2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.

With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.

Wedges

2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.

Putter

2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.

Ball

2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)

As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.

Grips

2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC

Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.