Equipment
The story behind Jason Dufner’s new National Custom Works irons
If you caught any of Jason Dufner shooting 66-68 on the weekend at The Players, you might have been intrigued by the blades the Auburn man was carving up TPC Sawgrass with.
GolfWRX members, not surprisingly, spotted the switch from his previous gamers over the weekend, eventually identifying Dufner’s irons as National Custom Works products.
We reached out to NCW to learn more about Dufner’s new weaponry, and company co-founder Patrick Boyd was kind enough to share some details.
BA: So Jason Dufner puts your clubs in the bag and lights it up on the weekend. How did this happen?
PB: I got an email from him a while ago…I saw the email and I laughed. I was like, ‘Yeah. OK. Sure, buddy.’ But I wrote an email back and said, “If this is you, I’d love to work with you on something.’ He gave me his number, we got in touch…scheduled an appointment with Don [White]. We spent an afternoon working with him on some sample clubs, and it’s kind of gone from there.
I text with him [Dufner] pretty regularly, and I’d heard from him the clubs were a couple of weeks out from making the bag, and he texted me Friday and said, ‘They’re going in the bag this weekend.’ And I hadn’t been paying attention to the leaderboard, so I thought he didn’t make the cut and he was just going home to mess around with them. Then, I’m watching Saturday and he shoots 66!
BA: So he just put them in the bag in the middle of the tournament? Crazy.
PB: Yeah. And the other interesting thing is, he’s a client like any of my other clients: he pays for his golf clubs. We don’t have a contract with him. He’s all about playing the best equipment that works for him.
BA: He insists on paying? Wow. So what was Jason Dufner looking for when he came to you initially, and what did you end up delivering?
PB: He’s been trying a lot of different stuff. He doesn’t have a contract right now. So, I asked him during that process what was happening and what he was seeing, and it became apparent that the soles on the irons he was playing were digging in too much. His spin rates were a little bit high, which to me indicates he was hitting it higher on the face than he’d like to. That was the beginning of the conversation. He was really, really thorough. He knew all his numbers and he knew exactly what he was talking about.
Initially, we met down at Albany. I had him bring what he was playing and what had been successful for him. Me and Don had a look at what was going on. It became clear pretty quickly what we needed to do as far as the sole configuration. That’s what he was fighting: the bottom of his golf clubs weren’t matching up with his angle of attack.
That was the first step. We made a couple of samples for him to take home…I got about two hours down the road and my phone rang. It was Dufner saying, “I hit balls with them. Everything is great. Just make this one little change,” and I got everything in to Don.
The first set we made for him, this is kind of interesting, when he told us about the trajectory he wanted and what he had in mind, Don looked at him and said, ‘Man, you want some blades!’ And he hadn’t played blades since he was in college. But the first project we worked on with our client were cavity backs.
He worked with them on Trackman and his numbers were really good, but the thing that was interesting to me was we used the smaller cavity back we work with and he thought it was a little too long heel-to-toe for him, so he asked me to make him a set of blades. So, we talked about that project…and once we had the sole knocked out and knew what he needed there, as well as what his preferred toe shape is, his preferred aesthetics, the offset he likes, it was pretty easy to put a set together for him.
The 4 and 5-iron are kind of a lower CG profile, and the 6-iron through pitching wedge is more of a mid-CG profile. He just wanted something to kind of knock it down and flight it a little bit flatter with the 6 through pitch, and then with the 4 and 5, he was looking for something a little easier to launch and hold greens with. Kind of a mixed muscle setup.
BA: It looks like he has Auburn colors on the ferrules? And can you confirm the stamping?
PB: Yep. I designed those ferrules for him. And the irons have the NCW star stamp in the toe of the muscle, and then we have the [Jason Dufner] Foundation logo. Then, the letters on the sole of the golf clubs are his dad’s name.
PB: Well, I’ll reiterate, what I thought was just fascinating was, when we initially had the conversation, he really wasn’t sure about working with blades. But once you get the sole profile knocked out for somebody and they’re not fighting the sole of the club…I mean, to me, it speaks volumes that once you get a set of blades in his hands with the correct sole profile it made such a difference in just his initial reaction to wanting to talk about blades…it’s just a testament to the importance of fitting somebody, getting the right sole for their angle of attack, tendencies, and conditions.
PONTE VEDRA BEACH, FL – MAY 13: Jason Dufner of the United States plays a shot during the final round of THE PLAYERS Championship on the Stadium Course at TPC Sawgrass on May 13, 2018 in Ponte Vedra Beach, Florida. (Photo by Sam Greenwood/Getty Images)
For more about National Custom Works, well, works, check out our Peter Schmitt’s talk with Patrick Boyd last month.
EDIT: Patrick sent Dufner’s full spec sheet along
Make up: 4-P Standard Flatback
Muscle: PMB Long Iron muscle with straight line 4/5, Phatty ’53 (PJB) muscle 6/7, Phatty ’53 (PJB) muscle but slightly higher than 6/7 for 8-P
Shape: duplicate samples
Grind: duplicate samples. Client noted modification per our conversation, please adjust accordingly
Loft: 23/28/32/36/40/44/48
Lie: 59.5/60/60.5/61/61.5/62/62.5
Offset: duplicate samples
Weights: D-3 (-2g for chrome) 50g grip, 38.5/38/37.5/37/36.5/36/35.75″ cut length
Finish: Dull Satin, prep for chrome
Stamping: 1/4″ letters 4 (F), 5 (R), 6 (A), 7 (N), 8 (K), 9 (E), P (D) on toe side of sole, DW on heel side of sole, JD logo stamp on muscle heel side, Star N logo on muscle toe side
Paintfill: none
Ferrule: Custom Auburn
Driver: TaylorMade Qi4D LS (8 degrees)
Shaft: Fujikura Ventus TR Blue 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 9 TX
Irons: TaylorMade P770 (3), TaylorMade P7CB (4), TaylorMade P7TW (5-PW)
Shafts: Fujikura Ventus Black HB 10 X, True Temper Dynamic Gold X100
Wedges: TaylorMade Prototype (50-SB09), TaylorMade MG5 (56-HB12, 60-LV07)
Shafts: True Temper Dynamic Gold S400
Putter: TaylorMade TP Juno
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Cord
Check out more in-hand photos of Christiaan Maas’ clubs here.
TaylorMade Golf’s MySpider program underwent a substantial overhaul over the last month. Firstly, the company launched the option to customize the Spider ZT model, and now the program has returned with the MySpider Tour and MySpider Tour X.
The revamped page now gives golfers complete control over every visual and functional detail of their putter on the popular Tour and Tour X head, with every cosmetic idea thought of. In MySpider Tour, golfers can choose from four head finishes, 16 paint fill colors, nine Surlyn face insert colors, three aluminum insert options, six sightline configurations, and four hosel options — L-neck, small slant, double bend, center shaft. Six sightline options are available in MySpider Tour, including the optically engineered True Path alignment system. MySpider Tour X gives builders the option of four head finishes, four hosel configurations, and five sightline options, also including True Path alignment.
One of the more interesting features of the new MySpider program is the availability of three distinct face insert options. Along with the usual Surlyn Pure Roll insert trusted by Scottie Scheffler and Rory McIlroy, which can be customized from nine colors, golfers can now also select firmer options. Two are offered with the black aluminum Pure Roll insert, slightly firmer than the traditional insert, or for the firmest feel, golfers can choose from two colors of milled aluminum inserts.
Another fun addition to the MySpider Tour is the ability to use the “Tommy Sightline.” The custom alignment aid design, which was first drawn onto Tommy Fleetwood’s putter by PGA Tour Rep James Holley, is based on the milled sightline on his Spider ZT head. There are five shorter lines on the left and right of a longer central line serving as the traditional short line alignment aid.
See below for the full specifications sheet for MySpider Tour and Tour X:
MySpider Tour
MySpider Tour X
Equipment
Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory
In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.
McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.
So, with that, why not compare his current setup to the clubs he used to break all the records?
Driver
2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)
McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.
What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)
The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.
Fairway woods
2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X
The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.
The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.
Irons
2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0
The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.
With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.
Wedges
2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.
Putter
2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X
Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.
Ball
2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)
As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.
Grips
2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC
Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.
What’s the story behind Webb Simpson’s custom-stamped irons?
Memorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Best irons 2026: Best irons overall, most forgiving irons, and more
J.T. Poston’s winning WITB: 2026 Memorial Tournament
Aaron Rai’s winning WITB: 2026 PGA Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Details on Jason Day’s latest prototype Avoda iron setup
Christiaan Maas WITB 2026 (June)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Fujikura Ventus TR Blue 6 X 3-wood: TaylorMade Qi10 (15 degrees) Shaft: Fujikura Ventus Black...
Ryan Palmer WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees) Shaft: Project X HZRDUS Smoke Blue RDX 60 TX 3-wood: TaylorMade Qi10 (15 degrees) Shaft:...
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament. Driver: Titleist GTS2 (8 degrees) Shaft: Fujikura...
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting) Shaft: Mitsubishi Chemical Diamana RB 53 S 3-wood: Titleist GT3 (15 degrees,...
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
Les
Jun 15, 2018 at 3:04 pm
I’m gonna get a set of those clubs to lower my score…. and get that ‘traditional’ look to my WITB arsenal of weapons… 😮
Soheil Shirzadi
May 18, 2018 at 12:49 pm
Scratch 2.0? Looks like Ari Techner is part of NCW
GCGC
May 17, 2018 at 10:45 pm
FINALLY a set of clubs with normal lofts! Yay to NCF and Dufner! Where is all the OEM BS about “our engineers lowered the center of gravity soooo much that we had to put the 6-iron loft down to 22° in order to keep the launch angle down and spin down to a manageable level”….. bla bla bla. You too can be a hero and impress your friends by hitting a 9-iron 225 yards (even though said 9-iron has only 21° of loft). Either NCF totally messed up in their design of this iron head – ‘cuz they are nowhere near the “modern high tech” clubs, or the OEM’s are all talking out of their arse. I think it is the latter. Just sayin’.
Hogan Fan
May 26, 2018 at 7:07 pm
I could not agree more! I would like an equipment manufacturer who lowers the CG and creates a higher launching club to actually let the club launch really high to help all those guys who are playing below the tree line. At least provide it as an option! I really don’t want a 27* #7 iron (this is actually true) I want my clubs to have reasonable launch angle, reasonable descent angle, reasonable spin and the appropriate combination of those three to actually be a useful set of tools to help me around the golf course. I really don’t care what they say on the bottom.
Marc Grenier
May 17, 2018 at 1:14 pm
Mr. Alberstadt,
VERY good article, simple terms, easy to understand. I subscribe to GOLF WRX. newsletter and will read your past and future articles. Keep up the good work.
HDTVMAN
May 17, 2018 at 9:28 am
???? Very good and interesting article.
Bob Parson Jr.
May 16, 2018 at 5:23 pm
They are not Parsons, meh!
JOEL K GOODMAN
May 16, 2018 at 8:35 pm
NO THEY AREN ‘T . THEY ARE BETTER BY FAR. AND PROBABLY NOT AS OVERPRICED.
ron
May 16, 2018 at 4:36 pm
now everyone wants them
Dave r
May 16, 2018 at 12:31 pm
One of the best articles I’ve read on here real good work . Good luck to Jason hope he does well on tour I know I’m pulling for him.
Mirage
May 16, 2018 at 12:10 pm
Don White. ‘Nuff said. Great piece!
Scott
May 16, 2018 at 11:32 am
Best article in a long time
2DudesTony
May 16, 2018 at 8:20 am
Duff Daddy has always been a pure striker & more than adequate putter. Everyone misses short putts regularly, most of us due to the “gimme”. I’d like to know what angle of attack caused a need for a different fitting. Details anyone? I used to be VERY steep w irons but corrected that w a posture change. Self taught but read & try a lot of teaching & have never had a fitting. At 66 I’m thinking it’s too late.
dat
May 15, 2018 at 11:10 am
Now this is quality content!
Mizzle Fizzle
May 15, 2018 at 4:08 pm
This.
Mizzle Fizzle
May 15, 2018 at 4:11 pm
Most on point article in looooong time.
douglas terry
May 15, 2018 at 10:42 am
I guess shaft info is not important?
JW
May 16, 2018 at 11:44 am
They probably didn’t shaft the heads…. and if they did you’re right it’s the least important info in everything provided. The impact the shaft has its minimal compared to sole grind, head design, etc but if you see the pics it looks like the S400 AMT Tour Issue that he’s been using but I’m sure he could find a tour van to build them with those and Superstroke grips
CJ
May 15, 2018 at 10:13 am
Great stuff…I see 12 oxygen theives marked it a shank…what a joke.
Chuck Barkley
May 15, 2018 at 12:14 am
Great piece! Yeah, loving the “hat a day” situation too. Walked into Lids today to ask about their connection to New Era and the The Players cap Jason wore, and they were like, “duhhhhhhh, we don’t have any info on that cap.” Well can you call your contact their? “duhhhhhh, we don’t have access.” Ehhhh whatever. Go Duffy!!!
Sue
May 14, 2018 at 11:48 pm
Love Dufner, this further supports my feeling!
rymail00
May 14, 2018 at 11:18 pm
This was a cool story.
I was such a huge fan of Scratch Golf (really sad to them go), but now to see the guys doing there thing again is awesome. I’m truly happy for them cuz they are a great group guys.
I like Dufner and hope he plays well with the new sticks and it helps shine some light on NCW.
moses
May 14, 2018 at 11:06 pm
Man I’m going back to blades. My iron game has been off lately.
Larry
May 14, 2018 at 9:45 pm
NCW is using open designs by a Chinese foundry and passing it off as custom.
2putttom
May 15, 2018 at 10:40 am
I must of missed that part in the article
Blake
May 15, 2018 at 2:10 pm
They do purchase blanks and grinds them. Not sure how open a blank design is
Lenny
May 14, 2018 at 9:26 pm
Duf is trying to look like a 72 year old man and succeeding.
Brett Weir
May 14, 2018 at 8:57 pm
Looks like some old school 1960’s Wilson Staff Blades.
2putttom
May 15, 2018 at 10:41 am
yep the ever successful step muscle design.
T. Lee
May 16, 2018 at 5:52 pm
DynaPowered from mid 60’s! minus the red plugs in heel.
JOEL K GOODMAN
May 16, 2018 at 8:37 pm
THEY WERE THE STANDARD FOR THE WORLD AT THAt time
len
May 14, 2018 at 8:49 pm
See… plain vanilla flavored muscleback fitted irons is all you need if you are a decent golfer… and the rest of us duffers hope our Super Game Improvement cavity back or hollow jello-filled multi-scruw irons will rescue our pathetic golf swing and wild ball flight. 😮
JD
May 14, 2018 at 8:45 pm
Those are some sharp irons. I’m very impressed. Love the Auburn ferrule. WDE
MB
May 14, 2018 at 7:33 pm
Duf’s the Man he will figure the putter out relax, very underrated ball sticker imo.
kevin
May 15, 2018 at 9:33 am
figure the putter out? he was +7.4 in shots gained putting for the week (top 3)…..and top 50 in 2018 for shots gained. the idea that dufner is an awful putter is such a myth
Thomas A
May 15, 2018 at 11:37 am
Everyone only watched his one mis-putt on the 18th on Sunday. Cost him $403,000.
SK
May 14, 2018 at 6:55 pm
See… plain vanilla flavored muscleback fitted irons is all you need if you are a decent golfer… and the rest of us duffers hope our Super Game Improvement cavity back or hollow jello-filled multi-screw irons will rescue our pathetic golf swing and wild ball flight. 😮
Matty
May 14, 2018 at 6:48 pm
How about a Jason Dufner Hat Compilation for 2018?
Gorden
May 14, 2018 at 6:39 pm
Love seeing Dufner and Woods for that matter, playing old style irons shows all these gimmicks the Club companies are putting on their clubs is nothing more then bubbles and bangles..truth known the Ping eye 2 could be brought back out and they would sell thousands of sets….
Richard
May 14, 2018 at 6:18 pm
What a fantastic story for National Custom Works. They are doing some great stuff. So cool that he paid for them!!!
Dan
May 14, 2018 at 5:34 pm
They look sooo one fashioned. Love em!!
I wish I could call Don White and have him make me a set
Buchs
May 14, 2018 at 6:25 pm
You can. Just call NCW. Patrick will hook you up. Just may take a little longer after this article lol.
the dude
May 14, 2018 at 5:17 pm
how bout they make him a putter…….(that 3 wiggle on 18 cost him ~ 700-400k)
Ryan Michael
May 14, 2018 at 7:49 pm
It’s not the arrow it’s the Indian.
Ralph Guldahl
May 14, 2018 at 10:09 pm
Tell that to the Indian with a quiver full of crooked arrows.
kevin
May 15, 2018 at 9:34 am
he was top 3 in putting for the week and +7.4 in strokes gained putting. what are you talking about?
Sue
May 15, 2018 at 11:05 am
All 4 rounds determine the $$$. He got to where he was because of all (4) rounds.
Tiger
May 15, 2018 at 6:43 pm
Go back to the land of stupid ignorant comments where you came from
The Dude
May 19, 2018 at 8:42 pm
Dumb…