Equipment
There’s a TaylorMade M1 440: More photos of TaylorMade’s 2017 drivers leak
Thanks to GolfWRX Member BillMurrayGolfing, we have a fresh batch of 2017 TaylorMade M1 driver photos in our forum. The first photos of the driver hit the internet on Halloween, and showed off the 2017 M1’s expanded use of carbon fiber in the driver head, particularly in the toe area. These photos show TaylorMade’s yet-to-be-announced driver in even greater detail.
Update: 2017 TaylorMade M1 440 driver photos surface

New photos have surfaced on our Facebook page of a 2017 TaylorMade M1 440 driver, which also shows a new M1 crown graphic.
“I’m playing the [TaylorMade M1] 440 this year and I’m gaining a few mph in club head speed, and carrying it about the same distance as the [TaylorMade M1] 460,” Facebook user Frank Casanova wrote. “But I really like the feel of this head. It has a unique sound as well, different from last years.”
Related: Join the discussion about TaylorMade’s 2017 M1 drivers in our forum.
For many years, TaylorMade has been offering consumers two versions of its flagship drivers: a 460-cubic-centimeter driver that offers more forgiveness, and a 430-cubic-centimeter driver that is more workable and offers lower spin.
For 2017, Taylormade appears to be releasing an M1 440, which also features a new M1 crown graphic. It seems safe to assume that an M1 440 would be slightly larger and more forgiving than the current M1 430 driver.
More photos of the 2017 M1 460
The new driver has slightly different crown graphics. The white section on the front of the driver crown has been made thinner. This change could showcase TaylorMade’s ability to use more carbon fiber on the crown of the club head (in place of heavier titanium) and position it closer to the club face, which would help move the driver’s center of gravity (CG) lower in the head. In theory, the lower a driver’s CG, the more distance potential it has.
The hosel adapter appears to be more tapered than previous models. This creates the appearance of a thinner, bonded-hosel driver at address, which many golfers prefer to bulkier hosel designs.
At least for its 2017 M-Series line, it seems TaylorMade will be using lime green and black as its flagship colors. The headcover looks great with its mostly black appearance and carbon fiber accents. The 2017 TaylorMade staff bags should look tremendous.
Related
Equipment
Slab city on the Korn Ferry Tour — Lead Tape Report
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.





Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.






Whats in the Bag
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype


Grips: Golf Pride Tour Velvet Align
Ball: Titleist Pro V1
Equipment
Name every set of irons you’ve owned – GolfWRXers discuss
In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.
@Lamosteve began:
Can you name every set of irons you’ve owned? Here’s mine
Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6
Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
- JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
- jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch






Mark
Nov 18, 2016 at 8:18 pm
Nothing to see here. Move along folks.
golfrnut
Nov 18, 2016 at 5:23 pm
440 CC M2 please…and you might get me away from my R9 V2 heads.
JJ
Nov 18, 2016 at 5:10 pm
Thanks TM!! Now if Callaway would just man up and show the Epic!
Rex
Nov 18, 2016 at 1:42 pm
JJ is a tool
rechlo67
Nov 18, 2016 at 12:50 pm
I don’t love the lime green, hopefully it looks better in person than in photos.
Most likely will be a bomber though.
RyanRuc
Nov 18, 2016 at 10:27 am
Am I the only one who immediately thinks Nike is buying Taylormade…? Neon yellow graphics, Tiger playing Taylormade woods, Koepka using the driver, Rory switching to the woods, Jason Day signing an apparel deal with Nike, Adidas seeking buyers, and Nike stops producing golf equipment…..?
Rex
Nov 18, 2016 at 11:01 am
thank you for your comment
JJ
Nov 18, 2016 at 11:45 am
Yes, RyanRuc, you are the only idiot Nike fanboy. Thank you.
Joseph
Nov 18, 2016 at 8:08 pm
Golf is a game. Golf manufacturing is a business. Nike was losing millions in golf. Adidas owns TM and is losing millions in golf. Adidas is Nike’s biggest rival as a company. So Nike is going to bail out Adidas and lose more money in golf. Uh. No.
HOP
Nov 18, 2016 at 1:06 pm
no
Jordan
Nov 18, 2016 at 1:57 pm
I agree with you 100% RyanRuc! It seems very odd that virtually all former Nike Golf athletes are switching to TaylorMade woods.
Tom
Nov 18, 2016 at 2:13 pm
Hmmmm….interesting theory
Jnak97
Nov 18, 2016 at 2:30 pm
Also, the enlarged crown graphic is very Nike
Mats B
Nov 20, 2016 at 12:49 pm
RyanRuc, I agree with you, wrote comments about it when the first pics were released of the M1 Driver and FW here at Golf WRX. Like you now, I received a few disagrees and silly comments. But I withstand my theory that Nike somehow will be involved in Taylor Made in the near future. Nike wants to be the biggest in all sports they get involved in. Getting TM under it’s wings is probably cheaper than continuing to try all on their own. 😉 We’ll just have to wait and see! 🙂
NW
Nov 18, 2016 at 10:25 am
I WANT TO HAVE BABY WITH THE DRIVER!
Jonnythec
Nov 18, 2016 at 10:19 am
This driver will be lighter for sure..I think it’s already too light. I’ll stick with my 1st gen m1 thanx.
JJ
Nov 18, 2016 at 11:46 am
No, it won’t. They’ll just pour more goop inside the head and make the weights heavier.
Not Scratch
Nov 18, 2016 at 9:55 am
Tiger will have this new model is his bag in two weeks. You heard it first
Jordan
Nov 18, 2016 at 2:00 pm
I suspect his entire bag will be TaylorMade with the exception being Vokey wedges and a Scotty putter.
mhendon
Nov 22, 2016 at 8:43 pm
Of course it will all be made by Muira! 😉