Connect with us

Equipment

McIlroy using TaylorMade M2 driver at WGC-HSBC Champions

Published

on

Update (10/27/16): The shafts in McIlroy’s M2 driver and fairway woods have been confirmed. McIlroy used TaylorMade’s M2 driver (9.5 degrees) and fairway woods (15 and 18 degrees) in Round 1 of the WGC-HSBC Champions.

Rory McIlroy is using a TaylorMade M2 driver at the WGC-HSBC Champions.

Photos of the golfer taken yesterday at Sheshan International Golf Club during his practice round confirm that McIlroy is swinging 9.5-degree head (set to lower) with a Mitsubishi Rayon Kuro Kage S TiNi 70X prototype shaft.

McIlroy was previously using Nike’s Vapor Fly Pro driver (9.5 degrees) with a Mitsubishi Rayon Diamana S+ 70 X-flex shaft at 45.5 inches.

Photos from PGATOUR.com’s Jonathan Wall (via @PGATourCochran) also confirm that Rory has two TaylorMade M2 fairway woods (15, 18 degrees) in the bag this week in Shanghai. The shafts are MRC’s Kuro Kage S TiNi 80X prototypes. McIlroy had previously used Fujikura’s Rombax Pro 95X shaft in his 15-degree Nike Vapor Speed fairway wood.

McIlroy’s other clubs (Nike VR Pro Blade irons, Nike Engage wedges and Scotty Cameron M1 prototype putter) appear to be the same. He is, however, wearing a new pair of Nike golf shoes in China this week.

Related

48 Comments

48 Comments

  1. bar

    Oct 29, 2016 at 5:40 pm

    Is he hitting any more greens or sinking any more putts?. Amazing the priority people put on hitting the ball 340 instead of 320 and then leaving a wedge 40 ft from the hole. I played in front of him in the West of Ireland a good few years ago and his short game (from150 – 80 yds ) was frightening.

  2. JOL

    Oct 27, 2016 at 6:08 pm

    I was watching the coverage of this tournament on the Golf Channel and heard one of the announcers say that Rory had picked up 6 mph in ball speed with the new driver! I don’t know if this is accurate, but if true that is a huge gain for a pro who you would think had access to the best fitters and equipment. BTW, he was at least 20 yards farther than Bubba on this particular hole I watched.

  3. B Hock

    Oct 27, 2016 at 10:54 am

    So I see what he shot but does anyone have any insight on how he actually drove the ball?

  4. Tal

    Oct 27, 2016 at 6:17 am

    TM drivers are great! The irons don’t feel good in my opinion but I have an M2 and it’s a great feeling and performing club. I don’t think he’s compromising at all by having it in the bag. I’ll be interested to see his iron selection though.

  5. Tony Rich

    Oct 26, 2016 at 11:07 pm

    He better hope he hits it more like DJ and not like Day.
    TM’s are well known for the duck hook, so is Rory. Should be interesting.

    • Launch monitor

      Oct 27, 2016 at 8:42 am

      “TM well known for duck hooks”?

      Get real. That’s a swing error nothing to do with the club

      • Tony Rich

        Oct 27, 2016 at 9:58 am

        Launch monitor, you must have never owned a low MOI Taylor Made. Everyone who has been on Wrx knows their low spinning heads have no forgiveness. Hence the dreaded heel/toe hook.
        It’s a most common thread. Buy a SLDR, R15, M1 to experience the hooks yourself. Hopefully Rory doesn’t do the same. Otherwise a Vapor or 917 await.

        • Tony is Poor

          Oct 27, 2016 at 12:14 pm

          Yeah that’s why he’s using the M2, with the weight at the back of the head for slightly higher MOI than the M1 or SLDR, and, it has a more open face than those others. You know nothing.

          • Tony Rich

            Oct 28, 2016 at 1:12 am

            The M2 is the same as the RBZ or r580XD….Taylor Made will have 2 more driver launches by January, and Rory will be playing the M4….this will a be a mute point.

            • H

              Oct 28, 2016 at 3:25 am

              You mean MOOT point. You American or summin? Don’t know English, eh?

              • Tony Rich

                Oct 29, 2016 at 8:45 am

                Mute point….as in silence from the Taylor Made bandwagon…how soon we forget the two majors Rory dominated, and his best year driving was in 2012, with a Titleist 913. BTW I’m Canadian, EH?

        • KK

          Oct 27, 2016 at 8:13 pm

          My SLDR has absolutely no forgiveness… for buds with when it’s time to pay up.

  6. Jeff

    Oct 26, 2016 at 6:56 pm

    Didn’t he play the Kuro Cage back in his VR Covert Red driver he won majors with? Nike guys equipment choices are really compelling stories, it seems a unique insight into what really are maybe better performing clubs.

    • AJ

      Oct 27, 2016 at 9:21 am

      I can’t vouch for the validity of this info, but as I was trying a Kuro Kage shaft at the PGA show demo day a couple years ago, a Mitsubishi rep told me and my dad that Rors’ “Diamana” was just a paint job. From what we gathered, my best guess is that he’s been playing the Kuro Kage all along, but they just changed the paint because the Diamana was the stock offering for the Vapor drivers.

      Like I said, I have no proof, but it’s an interesting thought.

  7. Tourpro

    Oct 26, 2016 at 6:29 pm

    Why not the M1 when it is clearly the top model with most adjustability? Or is Rory’s M2 maybe a painted version of the M1 to better promote the cheaper M2 version? Doesn’t make any sense.

    • Tal

      Oct 26, 2016 at 6:56 pm

      The M1 isn’t the “top model”. It just has more adjustability. If you don’t want it or need it then the M2 is the best option. Lots of pros use the M2.

  8. Maxwrx

    Oct 26, 2016 at 6:02 pm

    I suddenly have a hankering for a tour issue M2 head….

  9. someone

    Oct 26, 2016 at 2:43 pm

    Maybe the shaft change was more due to swingweight and moi. If I remember correctly the M2 heads are slightly lighter than other 460cc heads. So having the heavier shaft with the lighter head might have removed some feeling. Just speculation though.

    • Shutupyoumelts

      Oct 26, 2016 at 4:49 pm

      How the f-ck would you know maybe that shaft gave him the right spin numbers and the best accuracy.

      • mhendon

        Oct 26, 2016 at 5:47 pm

        He clearly said it was just speculation at the end so quit being such a D-ck!

      • Someone

        Oct 26, 2016 at 11:50 pm

        Well my speculation is based on the fact that this shaft is lighter than his last and the head is possibly lighter since the m2 overall is a lighter head than most 460cc. If he’s trying to keep the same feel as his last setup in order to kee the same tempo/rhythm it would make sense to Try and keep the same moi/swingweight. If that clears it up for you. But again as I stated that’s just my speculation based on the information that was presented. That’s all.

        • Launch monitor

          Oct 27, 2016 at 8:47 am

          Many times shafts models encorporate the shaft weight in the model, the truth is a 90X flex by any manufacturer, vs a 95X flex by a different manufacture could weigh the same. My own shaft is a 60 stiff and it weighs out a 68 grams.

    • Launch monitor

      Oct 27, 2016 at 8:45 am

      M2 head is a touch heavier, a couple of grams so there goes that theory.

      • someone

        Oct 28, 2016 at 9:47 am

        He’s using a tour head. it’s 10g lighter. the plus symbol near the hosel adjustment lets you know that it’s a tour head.

        Kuro kage S tini 70 X flex – stock is 77grams but he’s playing a proto, so it could be different. might not be that far off however.

        Diamana S+ 70 X flex – 72 grams

  10. cwt

    Oct 26, 2016 at 12:52 pm

    Yikes! It’s telling that Rory has begun exploring so quickly after being released from his contract. If Nike had actually made a good golf club, Rory would want to get as much milage out of it as possible.

    Even though there’s not much contract money at Mizuno, I’d like to see him at least try Mizuno irons. Hopefully Rory has learned that winning tournaments is more important to his legacy than lucrative contracts.

    • Jason

      Oct 26, 2016 at 1:08 pm

      Typical Mizuno and Apple fanboy. #sheeparmy

    • Lee

      Oct 26, 2016 at 1:49 pm

      Why would he change the Miura blades that work so well for him!

    • mhendon

      Oct 26, 2016 at 5:50 pm

      Yeah its a shame Nike made such inferior equipment, hell Rory might have won the Fedex cup otherwise!

    • Cris

      Oct 26, 2016 at 9:51 pm

      Lucrative contracts equals more available money. With enough money you can get your name on a hospital wing, museum, library, or university. That’s how you build a legacy.

    • mctrees02

      Oct 27, 2016 at 7:52 am

      It’s been almost 3 months since Nike axed their golf department. He didn’t exactly rush out the door looking for new clubs as evidenced by his Nike irons and wedges with which he’s won majors and now the FedEx Cup still being in the bag.

  11. lifeHack

    Oct 26, 2016 at 11:20 am

    This is probably the first step to purchase Taylormade together with Tiger. Combined with the star power of Johnson and Day TM will be the death star of golf equipment. If they make good clubs probably everybody will be playing TM within 2 to 3 years. That will make golf great again!

    • Neil Cameron

      Oct 26, 2016 at 11:36 am

      possible for sure

      maybe Johnston and Day part of the deal also.

  12. Par4

    Oct 26, 2016 at 10:07 am

    Not the freaking arrow, it’s the Indian…

  13. Uhit

    Oct 26, 2016 at 9:48 am

    I guess he is using the Kuro Kage Silver TiNi 70 Flex-X…
    …I also have this shaft and it looks the same.

  14. The Truth

    Oct 26, 2016 at 9:33 am

    If he wins this week with the M2. The Taylormade fanboys will blow the roof off this place.

  15. Rev G

    Oct 26, 2016 at 8:25 am

    He struggled so badly the last couple times he switched irons (espcially when he switch brands), I just don’t think he’s going to be switching those so quickly. Unless he’s offered gobs of money soon, I don’t see him switching until next year’s off season.

    • Shutupyoumelts

      Oct 26, 2016 at 4:42 pm

      It was the ball he stuggled with not the irons
      The change from the pro v1x to the 20xi was the problematic change

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory

Published

on

In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.

McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.

So, with that, why not compare his current setup to the clubs he used to break all the records?

Driver

2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.

What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)

The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.

Fairway woods

2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.

Irons

2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.

With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.

Wedges

2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.

Putter

2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.

Ball

2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)

As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.

Grips

2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC

Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.

Continue Reading

Equipment

From the GolfWRX Classifieds: Titleist Vokey Proto Wedges 54M, 60T

Published

on

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.

From the listing:

(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.

Continue Reading

Whats in the Bag

Ryan Palmer WITB 2026 (June)

Published

on

Driver: Callaway Quantum Triple Diamond (9 degrees)
Shaft: Project X HZRDUS Smoke Blue RDX 60 TX

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Project X HZRDUS T1100 70 6.5

5-wood: TaylorMade SIM2 Max (18 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 80 TX

Irons: Srixon ZXiU (23 degrees), Srixon Z785 MB (5-PW)
Shafts: Project X HZRDUS Smoke Black RDX 100 6.5 (4), KBS Tour 130 X

Wedges: Titleist Vokey Design SM11 (50-08F, 54-10S, 58-04T @59)
Shafts: KBS Tour 130 X

Putter: Odyssey Dual Force Rossie II

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet

Check out more in-hand photos of Ryan Palmer’s clubs here.

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending