Equipment

For its 50th Anniversary, Ping is recreating the original Anser putters

Published

10 years ago

Jun 14, 2016

In 1966, Karsten Solheim invented the Ping Anser putter, which has became so popular that when golfers see an imitator — and there’s a lot of them — they’re often dubbed “Anser-style.” Fifty years later, Ping has gone to great lengths to create a limited-edition line of Anser putters that are as much like the originals as possible.

The limited-edition putters are made from the original Anser molds, using the original parts and metals, and created in the same foundry that produced the first Anser putters. So for golf history buffs, this release is something special.

Making the story better is that Karsten’s son and current Ping CEO John Solheim will have his hands on every single putter released. Ping plans on releasing 1,550 right-handed versions, and 150 left-handed models. Solheim is grinding the soles of each putter, just as he used to do with the original Ansers in his father’s garage.

The putters will have the original Ping grips, which Tiger Woods has since made famous, and the shafts are made by True Temper, with the same step pattern as the originals.

What’s “modernized” about the new putters are the toe and heel bumpers, which used to be shaped by hand using sandpaper. The 2016 versions had that shaping already built into the molds.

Speaking of those molds, there’s either a “K,” which stands for Karsten, or an “A,” which stands for “Allan,” John’s brother, engraved on the hosel of the putters, which indicate which of the two original molds were used to cast each putter. According to John Solheim, the putters produced by the different molds will not be identical because the Karsten, or “K” mold, had the radius on its heel slightly nicked. So the heel on the “K” putters have what John calls the “slope side.”

While the putters are made from the same high-strength, manganese-bronze metal, the hosels are applied with epoxy, while the originals were not. Without the epoxy, the original Anser putters sometimes cracked at the hosel, according to Solheim.

You will also notice inserts in the toe and heel, which are tungsten weights used to bring the heads “up to weight.” The putter heads weigh 350 grams, which is significantly heavier than the originals, but standard these days.

The putters have no release date at this point, but sometime before the 51st Anniversary would be a safe bet. Remember, John Solheim is grinding each of the putters, which he says takes roughly 4-5 minutes each. There is no set price, either, but according to Solheim, “They won’t be cheap.”

See what WRXers are saying about the putters in our forum.

Related Topics:

Up Next

Vokey releases SM6 V Grind on WedgeWorks

Don't Miss

Top 10 purchases to make at the U.S. Open Merchandise Tent

Andrew Tursky

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

9 Comments

cgasucks

Jun 20, 2016 at 2:38 pm

If Mr. Solheim himself is going to grind the putters like his dad did you know its not gonna be cheap…

Reply Report comment
MisawaGol4

Jun 16, 2016 at 6:23 am

So these are exactly like the originals, same metal, same molds, and from the same garage. Minus the fact that now they have added weight plugs and the hosels are attached differently, but John Solheim will be guaranteed to have touched these for at least 4 whole minutes! Who can put a price tag on that? Apparently Ping can. There is a reason the originals value will increase and these will start high but never really amount to much. I never buy a limited or collectors edition of anything. You are guaranteed that they will be anything but that.

Reply Report comment
jimmy snodgrass

Jun 15, 2016 at 11:04 am

maybe i should’nt give my secrets away but i could never afford pro shop prices for clubs or clothing, i play golf at public courses because of the mostly private club restrictions on attire. i wear golf polo shirts, with whatever nice club logo i know, have a dozen masters shirts, several congressionals, and even a bob hope chrysler classic, most of them bought for 2 to 3 dollars. i wear levi’s , not holed up because they fit me best. i had a fairly nice, pleated pair of pants with the pockets cut down the sides, hopped into a golf cart, and lost most of the items in my pockets, because, when sitting, the pockets were parallel, coins and a swiss army knife were lost somewhere on the course, and i still have 2 pairs of leather footjoy classics with steel spikes, in great shape, just waiting for the day when they are re-allowed.

Reply Report comment
- Ryan morris
  
  Jun 16, 2016 at 4:46 am
  
  I missed the secret.
  
  Reply Report comment
  - The MailMan
    
    Jun 19, 2016 at 3:30 am
    
    Not true. I am actually doing your husband.
    
    Reply Report comment
Anser 4

Jun 15, 2016 at 12:58 am

If this came in Anser 4 I would be over it like a rash.

Reply Report comment
Weekend Duffer

Jun 14, 2016 at 11:13 pm

You can buy the actual originals for $35 on eBay, yet they will likely charge $350 for the remake.

Reply Report comment
- Joey
  
  Jun 15, 2016 at 8:58 am
  
  Less than that. You can get Zings and My Days for around $10 bucks (shipping not included).
  
  Reply Report comment
- Joe Duffer
  
  Jun 15, 2016 at 12:08 pm
  
  Wrong… a nice original Scottsdale Anser will still bring north of $1000
  
  Reply Report comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Slab city on the Korn Ferry Tour — Lead Tape Report

Published

21 hours ago

Jun 10, 2026

Andrew Von Lossow

This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.

Joel Thelen

Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.

First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.

Mitchell Meissner

Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.

Whats in the Bag

Bud Cauley WITB 2026 (June)

Published

21 hours ago

Jun 10, 2026

Will Schube

Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX

7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX

Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue

Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype

Grips: Golf Pride Tour Velvet Align

Ball: Titleist Pro V1

See more in-hand photos of Bud Cauley’s clubs here.

Equipment

Name every set of irons you’ve owned – GolfWRXers discuss

Published

21 hours ago

Jun 10, 2026

Will Schube

In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.

@Lamosteve began:

Can you name every set of irons you’ve owned? Here’s mine

Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6

Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”

Entire Thread: “Name every set of irons you’ve owned.”