Equipment
Review: Ben Hogan Ft. Worth 15 irons vs. Hogan irons of old
The Ben Hogan Company returned to the golf equipment business with the introduction of its Ft. Worth irons in January. We detailed the release at the time, and a bevy of reviews have populated the internet in the time since.
Let’s recap the Ft. Worth marketing literature and features.
The Ft. Worths (and TK Wedge) come in 44 loft options from 20 to 63 degrees. While it may take some getting used to, the company’s slogan, “precision is back,” is driven home by the arrangement.
The irons are forged from 1025 carbon steel and feature the V Sole design developed by company CEO Terry Koehler, which maximizes playability from any lie, according to the company, thanks to a high-bounce leading edge and lower-bounce sole.
Also visually apparent and a centerpiece feature of the irons: perimeter weighting.
Again, we wondered how the new Hogans would stack up against some of the great Hogan irons from the past 50 years. Further, we wondered how those irons compared to one another. How would, say, the Power Thrust iron of the early 60s compare to the 1999 Apex?
(L-R) Irons 1, 2, 3, 4, 5 listed below
The irons we tested
- Power Thrust (1962)
- Apex II (1979)
- Apex Redline (1988)
- Apex (1999)
- Ft Worth
From the Power Thrust (1962) to the Ft Worth (2015)
The lengths, lie, lofts were all within a degree of each other (30-31), standard length (37.50 inches – with the Power Thrust, despite being a 5 iron, 0.5-inches shorter) and standard lie of 60 degrees on all.
In our testing, conducted on an outdoor driving range with 5-10 mph of wind and using a TrackMan to record the data, the Ft. Worth irons were longer, generally higher flying, generally more precise, and at least as efficient as any other Hogan iron in terms of smash factor.
Conducting the testing, your intrepid writer and a pair of Class A PGA pros.
Dispersion graphics
David’s dispersion
Jeff’s dispersion
Ben’s dispersion
The Hogan Company also did its own testing using 15 golfers with club speeds from the mid-70s to the mid-90s. In all of the company’s tests, the Ft. Worth was either the longest or second-longest club.
For the single-digit handicapper, the club represents a modest improvement over the previous iron models. For the mid-handicapper, however, it’s a playable forged iron, as the data indicates.
The Ft. Worth possessed a more solid feeling strike and a significant amount of feedback, all while performing better than expected on off-center hits. Enthusiasts will definitely see and feel the similarities between the Ft. Worths and the most recent Hogan Apex. However, they’ll also likely see better performance on the launch monitor and plenty of workability on course.
The player will certainly feel any misses, but won’t get the hand-numbing sting of older blades. Good, solid sound, and soft feel on center strikes. Great turf interaction, especially on steeper swings (thanks V Sole).
There’s no doubt these clubs mark a step forward for the Hogan Company and open cast a wider net for potential players.
A forged blade iron may be a difficult sell in an environment where the best golfers in the world are playing multi-material clubs. However, if you’re a purist and/or a Hogan disciple, don’t hesitate to go through the HoganFit process.
[wrx_retail_links productid=”22″]
Driver: TaylorMade Qi4D LS (8 degrees)
Shaft: Fujikura Ventus TR Blue 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 9 TX
Irons: TaylorMade P770 (3), TaylorMade P7CB (4), TaylorMade P7TW (5-PW)
Shafts: Fujikura Ventus Black HB 10 X, True Temper Dynamic Gold X100
Wedges: TaylorMade Prototype (50-SB09), TaylorMade MG5 (56-HB12, 60-LV07)
Shafts: True Temper Dynamic Gold S400
Putter: TaylorMade TP Juno
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Cord
Check out more in-hand photos of Christiaan Maas’ clubs here.
TaylorMade Golf’s MySpider program underwent a substantial overhaul over the last month. Firstly, the company launched the option to customize the Spider ZT model, and now the program has returned with the MySpider Tour and MySpider Tour X.
The revamped page now gives golfers complete control over every visual and functional detail of their putter on the popular Tour and Tour X head, with every cosmetic idea thought of. In MySpider Tour, golfers can choose from four head finishes, 16 paint fill colors, nine Surlyn face insert colors, three aluminum insert options, six sightline configurations, and four hosel options — L-neck, small slant, double bend, center shaft. Six sightline options are available in MySpider Tour, including the optically engineered True Path alignment system. MySpider Tour X gives builders the option of four head finishes, four hosel configurations, and five sightline options, also including True Path alignment.
One of the more interesting features of the new MySpider program is the availability of three distinct face insert options. Along with the usual Surlyn Pure Roll insert trusted by Scottie Scheffler and Rory McIlroy, which can be customized from nine colors, golfers can now also select firmer options. Two are offered with the black aluminum Pure Roll insert, slightly firmer than the traditional insert, or for the firmest feel, golfers can choose from two colors of milled aluminum inserts.
Another fun addition to the MySpider Tour is the ability to use the “Tommy Sightline.” The custom alignment aid design, which was first drawn onto Tommy Fleetwood’s putter by PGA Tour Rep James Holley, is based on the milled sightline on his Spider ZT head. There are five shorter lines on the left and right of a longer central line serving as the traditional short line alignment aid.
See below for the full specifications sheet for MySpider Tour and Tour X:
MySpider Tour
MySpider Tour X
Equipment
Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory
In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.
McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.
So, with that, why not compare his current setup to the clubs he used to break all the records?
Driver
2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)
McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.
What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)
The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.
Fairway woods
2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X
The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.
The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.
Irons
2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0
The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.
With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.
Wedges
2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.
Putter
2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X
Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.
Ball
2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)
As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.
Grips
2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC
Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.
What’s the story behind Webb Simpson’s custom-stamped irons?
Memorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Best irons 2026: Best irons overall, most forgiving irons, and more
J.T. Poston’s winning WITB: 2026 Memorial Tournament
Aaron Rai’s winning WITB: 2026 PGA Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Details on Jason Day’s latest prototype Avoda iron setup
Christiaan Maas WITB 2026 (June)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Fujikura Ventus TR Blue 6 X 3-wood: TaylorMade Qi10 (15 degrees) Shaft: Fujikura Ventus Black...
Ryan Palmer WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees) Shaft: Project X HZRDUS Smoke Blue RDX 60 TX 3-wood: TaylorMade Qi10 (15 degrees) Shaft:...
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament. Driver: Titleist GTS2 (8 degrees) Shaft: Fujikura...
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting) Shaft: Mitsubishi Chemical Diamana RB 53 S 3-wood: Titleist GT3 (15 degrees,...
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment4 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
iSeeClearly
May 22, 2018 at 12:28 am
“…an environment where the best golfers in the world are playing multi-material clubs.”
…or an environment where the best golfers in the world are selling multi-material clubs. Ya think??!!!
Panther73
Sep 9, 2016 at 6:31 pm
I would really like to find my first Hogan set, Apex II, Apex 5 shaft, 2-Pw Black filled Cameo. The one thing to change would be CC grooves, the original sets were V grooves, Hogan Balata balls had super thin covers. Same thing now with ball covers softer to match up with current groove regulations. Any ideas? Fly to Japan to Miura and recreate them?
Billy Bondaruk
Jan 15, 2016 at 9:39 pm
I first played Hogan Irons in the 70’s in High School and jr. Golf. My dad was a state am champ and he played them… Every few years we would get a new set and I’d take his, until the apex set cam put….. We both played them and I had a great year playing so did he….. Last year I went the PGA Show, with out my Dad… He’s gone now….. But the feeling of hitting a Ben Hogan iron…. That Hogan Apex iron the one we bothe bought that year back in the 1980’s…. I found it at last years show, but it was better…. Much better and it was a shock that that was even possible. Couple that with the history and the hero that you loved thru life, his stories and jokes…. What the man stood up for in this game….. I bought two sets. The 21 degree iron my friends call it the sniper rifle. I have never had an easier 3 iron to hit….. You fell the speed off the face. Carve it anyway you want. And the tradition to keep lofts at least close to what they should be….. Com om Man…… Hogan was the a man that changed golf
Dave
Oct 20, 2015 at 2:44 am
My first full set of irons was a used set of apex irons, with some powerbilt persimmons, some 30+ yrs ago. Looked great but not very forgiving. Still to this day at address, I like the look of a straight sole line and not too thick a top line.
Peter Whitford
Oct 8, 2015 at 2:35 pm
I played Hogan Apex’s with a # 4 Hogan shaft–loved those blades. I had them refinished and restored 3 times–they finally wore out unfortunately. I am interested in these but they don’t have any shaft options to speak of. I now play Titleist 710 MB’s with a Project X 5.5 Shaft–I would switch to these in a heartbeat if they could put a decent shaft in them–KBS isn’t that great a shaft.
JP Sourdellia
Oct 14, 2015 at 12:41 pm
Peter – You can order your Ft. Worth 15 irons with the Project X 5.5 shaft, if that’s your preference. We offer a wide selection of custom shafts and I’m sure we can accommodate your needs. Please call our customer service line to speak with one of our experts. 844-53-HOGAN(46426)
Walt Pendleton
Oct 6, 2015 at 3:06 pm
I have just three words to say about the new Hogan irons I just bought…smallest dispersion ratio! It’s all about the misses, gentlemen! We all create them.
Mark
Oct 5, 2015 at 8:52 pm
Regardless of outcome, that is a timeless lineup. Pure class.
Brian K
Oct 5, 2015 at 2:52 pm
Did each iron have the original stock shaft or reloaded with the same shaft? Wouldn’t the original shafts in power thrust, Apex II and Apex 88 be too worn and degraded to make and accurate comparsion?
Carlos Danger
Oct 5, 2015 at 11:12 am
I have a set of the 89 Apex sitting in my office looking clean and pretty. I grew up with them and have always wished Hogan would make a comeback…so needless to say I was pretty excited to see the Ft Worth come out. I love the website process of building them out and of course they look beautiful.
However, I think I will wait to order them until a cavity back or slightly larger iron head is released. At this point in my life, trying to hit a 4 iron blade is just not all that enticing. Im currently playing Adams CMBs (which are not terribly far off from a blade) so if Hogan releases something slightly bigger I dont think I could stop myself from ordering a mixed set.
John C
Oct 5, 2015 at 9:54 pm
You like Hogan.. Just get the Lofts that are 6 Iron and down.. Worth it.. Why wait if Hogan is your favorite..
Carlos Danger
Oct 6, 2015 at 9:25 am
to be clear…the thought of beautiful Hogan blades in my bag is my favorite. the reality of trying to hit a blade 4 iron consistently is another thing.
Im sure they will expand and make a slightly bigger iron, by then I will be due for some new ones:)
rex235
Oct 5, 2015 at 3:09 am
RH ONLY.
barf
Oct 4, 2015 at 12:55 pm
Were the shafts standardized for this test? The shafts alone in the older clubs make the comparison lopsided.
Jamie
Oct 3, 2015 at 11:14 am
You can really see the influence of SCOR clubs. I guess same owners!
mhendon
Oct 3, 2015 at 10:25 am
I got to say that’s an extreme release cycle there. 17 years followed by 11 and 11
birly-shirly
Oct 2, 2015 at 6:04 pm
Kudos for carrying out the test, but does it really mean anything? Ignore the scatter graphics, and what is the data saying?
Smash factor – 2 out of 3 testers saw no advantage to the new club.
Spin – 2 out of 3 testers got more spin from older clubs.
Height – 2 out of 3 testers hit older clubs higher.
Landing angle – all 3 testers had older clubs landing steeper.
I’m not saying that proves the older clubs are better. I am asking what conclusions can you really draw from this? Is this a test of how the clubs perform, or the swings the testers made?
billm311
Oct 4, 2015 at 8:02 pm
I currently play with Hogan anniversary blades, dynamic gold shafts. I used the hogan demo pack to test the new irons head to head with mine. Though the lofts were not exact matches, the biggest difference for me was shaft used. I’d like to try them again with matching shaft and length of shaft. In the end, I did really enjoy the new club. Very clean look, slightly thicker and rounder than my current blades, but produced very nice results.
In the end, I did not make the switch. My clubs are custom fit, so they feel perfect to me. A little extra forgiveness would be nice – for that reason, I am considering getting just 4, maybe 5 iron replacements with slightly different loft spacing.
Well designed club if you are looking at forged blades, just make sure to get the right shaft for you!
HR
Oct 5, 2015 at 12:45 am
Well at $149 per club, it ain’t cheap. With no custom shaft options, it’s highway robbery
JP Sourdellia
Oct 14, 2015 at 12:45 pm
HR – We do offer a large selection of custom shafts. You can call one of our experts at 844-53-HOGAN(46426) to discuss what shaft options we offer. I’m sure we can accommodate your needs.
cbails00
Oct 2, 2015 at 5:25 pm
I think this is a fantastic exercise and cool to see how Hogan compares to Hogan. I would be curious how the new Hogan Ft. Worth 15 irons would stand up in a similar test against the new multi-material irons – 716 AP2, new Apex Pro’s, TM PSi, Ping i Series etc. If the results were good for the Ft. Worth 15’s it might make them more appealing to purchase.
Bogeypro
Oct 2, 2015 at 5:19 pm
I just feel that it is completely confusing to not put an iron number. I don’t want to have to remember the loft. Just say, 6 iron, not 31 or whatever it is…
michael
Oct 2, 2015 at 4:19 pm
I play the apex ii plus and I love them had the lofts tweaked a bit due to my slower swing speed but they feel great. Love the feel of forged irons.
Joe
Oct 2, 2015 at 3:22 pm
I play the Hogan Apex 1999 model, love them. Also, am selling a refinished Hogan Apex 1999 model in the classified.
I much refer these to the current Apex by Callaway.
RB
Oct 2, 2015 at 1:37 pm
The spreadsheet descriptions for the irons should match the descriptions at the start of the review. And in the same order. It’s quite confusing which Apex is which. Consistency would help.
Cliff
Oct 2, 2015 at 3:17 pm
it’s not THAT difficult to follow!
Rich
Oct 2, 2015 at 9:28 pm
I agree it should be more consistent at a glance. If you take a few minutes, you can figure out which one is which. Not very well done though in regards to ease of understanding.
BS
Oct 2, 2015 at 12:25 pm
I see no similarities at all. That is BS
Craigar
Oct 2, 2015 at 11:51 am
Just out of curiosity what were the differences in shafts as far as frequency?
TR1PTIK
Oct 2, 2015 at 11:22 am
I learned how to play golf with an old set of blades, and prefer a more classic looking club despite my higher handicap. I’d love to give these irons a try sometime.