Equipment
Scotty Cameron Futura X5 and X5R Putters
Oversized putters were once a rarity in professional golf, but not anymore. These days, they’ve become the norm, with as many as 50 percent of PGA Tour players using them each week on Tour.
Scotty Cameron’s new Futura X5 and X5R are a result of the increased demand for larger putters by the world’s best players.
“The Futura X5 mallet is for someone who likes the stability of a bigger head, the feel of a bigger grip and likes to look down and see more lines for alignment purposes,” Cameron said. “X5 is more of a mechanical shape where the X5R is a softer, rounder shape. There’s no right or wrong. Same performance, same weight, same feel. It all depends on what you like to look at.”
Futura X5
Futura X5R
Both putters have a multi-material design that includes a 303 Stainless Steel body and a 6061 aluminum sole plate. The use of aluminum extends into the “wings” of the putters and allowed Cameron to move weight to their extreme perimeter. That improves a putter’s stability and resistance to twisting.
And there’s another, not-so-hidden benefit to larger putters.
“The bigger the head, the more lines you can add for alignment,” Cameron said. “We worked with many players on tour and in the Putter Studio during the development of X5 and they all told us the same thing: It adds confidence.”
Futura X5
Futura X5R
The X5 and X5R putters also have single-bend shafts with a higher bend point that make them face-balanced.
“The single bend came from taking feedback from the tour and working with players in the Studio. Double bends have been around for years and for X5 we really wanted to clean up the look,” Cameron said. “We had many players say they wished that the shaft leaned at their target or on their line, so we worked to find the proper offset and lean of the shaft so, at address, the bend lines up pointing right at your target. That was a key one because the mechanical-industrial shape of the head and the clean mechanical-industrial bend match perfectly. What I didn’t want was a heavy, flowing bend onto a mechanical head.”
Each model has a 10-inch Matador Red Midsize grip that weighs 77 grams.
“The grip can complement or kill the design of the putter,” Cameron said. “I know that sounds strange, but grips make a difference. With blades, it’s a little more handsy, a little more flowing, a little more feel. With Futura X putters, it’s a little more robotic, a little more square-to-square and this larger Matador grip complements the head very well.”
The Futura X5 and X5R putters ($349) will be in stores on Oct. 31. They both have Cameron’s Silver Mist finish are are available in lengths of 33, 34 and 35 inches. For lefties, the X5 is available in lengths of 33, 34 and 35 inches.
Click here to see in-hand photos of the Futura X5 and X5R from the PGA Tour.
Futura X5 Dual Balance
A Futura X5 Dual Balance ($399) will also be available on Oct. 31. It has an extra 50-gram weight located under its aluminum sole plate, which is counterbalanced with a 50-gram weight in its 15-inch grip that can help smooth out certain golfer’s strokes.
Stock length is 38 inches, but lengths of 36-to-40 inches in 0.5-inch increments are available by custom order.
Click here to see in-hand photos of the Futura X5 and X5R from the PGA Tour.
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.
Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX
7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX
Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue
Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype
Grips: Golf Pride Tour Velvet Align
Ball: Titleist Pro V1
In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.
@Lamosteve began:
Can you name every set of irons you’ve owned? Here’s mine
Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6
Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
- JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
- jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
What’s the story behind Webb Simpson’s custom-stamped irons?
Memorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Best irons 2026: Best irons overall, most forgiving irons, and more
J.T. Poston’s winning WITB: 2026 Memorial Tournament
Aaron Rai’s winning WITB: 2026 PGA Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament. Driver: Titleist GTS2 (8 degrees) Shaft: Fujikura...
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting) Shaft: Mitsubishi Chemical Diamana RB 53 S 3-wood: Titleist GT3 (15 degrees,...
Asterisk Talley WITB 2026 (June)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Blue 6 S 3-wood: TaylorMade Qi4D (16.5 degrees) Shaft: Fujikura Ventus Blue...
Brianna Do WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees) Shaft: KBS PGW 3-wood: Callaway Elyte Titanium (15 degrees) Shaft: KBS PGW 5-wood:...
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News2 weeks agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Whats in the Bag4 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
j T
Jan 20, 2015 at 10:39 pm
I have every top line putter ever sold seriously and played them all but folks when you put a scotty in your hand you know it the feelins is totally exhilarating I would describe it as getting out boy a vega in to a Cadillac
DBN
Dec 18, 2014 at 4:11 pm
Umm why doesn’t everyone keep there opinions are so valuable since none of them are on tour. Lets get some responses to those who have actually tried the putter!! Tried it and loved it!! can’t beat a scotty and the way the ball releases off the face!!
Rich
Oct 16, 2014 at 5:15 pm
Yes the design is copied but as stated a few times below, it happens all the time in this industry. I think they are beautiful putter and from reading the article attached, it would seem at least there has been some thought go into the finer detail of these putter. I’m looking forward to seeing what they are like in hand.
dko
Oct 16, 2014 at 10:53 am
I wish, I wish, I wish … I could afford a Scotty Cameron putter.
TT X
Oct 15, 2014 at 3:33 pm
He copied an Odyssey and the Yes Sandy which is more round on the wings. The Odyssey was well before the YES which was 2012. Callie is an Anser style and Tracy has an Anser body but a double bend face balanced shaft. No hosel.
Kmac
Oct 15, 2014 at 6:43 pm
Who cares? He makes great putters. They mass produce.
TT X
Oct 15, 2014 at 8:24 pm
Didn’t say he doesn’t make great product, simply stating the facts as they are.
JB
Oct 16, 2014 at 1:44 am
All this nonsense about who copied who. Are we 12? Who cares, IMO. If it makes me a better putter, copy it from Tommy Armour for all I care.
Don Koo
Oct 16, 2014 at 10:51 am
Yup. Well said. EVERYTHING on the market today is a variation of something already there.
TT X
Oct 16, 2014 at 11:32 am
As long as the designer is compensated it shouldn’t matter copied who.
Jeff
Oct 15, 2014 at 3:24 pm
I think the odyssey #7’s popularity came from the Yes! Tom Watson used in almost winning the 2009 Open Championship. So it’s not really surprising to see the design make the rounds.
Kevin
Oct 15, 2014 at 2:25 pm
Any idea why they didn’t make the face deep milled like the Select line?
JB
Oct 16, 2014 at 1:46 am
I was wondering the same thing. Wonder if the deep mill didn’t really benefit that big of head?
Tom D
Oct 15, 2014 at 10:53 am
Should’ve named the X7, since they are obviously the Odyssey #7 shape.
Jeff
Oct 15, 2014 at 3:18 pm
+1
Will
Oct 15, 2014 at 10:39 am
Yes, this putter looks very similar to the odyssey #7 or sabertooth. But for those of you complaining about the similarities I hope you also complain about any anser/Newport style putter from Odyssey, Taylormade, Cleveland, see more etc as those are just a copy of the original Ping anser.
I have used an odyssey #7 for years now but I’m looking forward to a deep milled version.
GR
Oct 15, 2014 at 10:35 am
Zac, thanks for your articles and information. They are very helpful.
I do have a question though. Due to a tendency toward pulling putts, I have changed to center shafted mallets with a more straight back and forth putting stroke. However, I see mostly heel shafted (like the Futura outlined). More than likely it is a demand issue. What is the % of pros and/or golfers that use the center shafted putters? Any recommendations? Thanks.
Zak Kozuchowski
Oct 15, 2014 at 10:56 am
Center-shafted putters are rare on tour, but some players swear by them. It’s all about preference and confidence.
I used to play a center-shafted mallet as well, but I’ve since switched to a heel-shafted mallet after I saw that I got better numbers with those models on a SAM PuttLab. If there’s a SAM in your area, I’d recommend that you try it. Otherwise, guess and check is a great process.
And if your putter is working for you, why switch?
Thanks for reading, GR.
Food
Oct 15, 2014 at 9:58 am
Gimme some seed, I’ll go till the field with these and feed the world with the food I can grow
Baka
Oct 15, 2014 at 9:51 am
Blatant copy of Odyssey Tank Cruiser and Versa #7 putters. At Titleist, we don’t innovate we imitate.
Joe W
Oct 15, 2014 at 10:18 am
everyone copies everyone for the most part. they just add their little/tiny differences to the mock up.
Lane
Oct 15, 2014 at 1:06 pm
True, but I think the Cameron X5 looks better than its predecessors. IMO, it’s imitated AND improved.
t-ball
Oct 15, 2014 at 10:46 am
If we want to blame Scotty for copying, we have to blame Odyssey too ! I think the first version of this style head was a YES Callie. Plus, you really can’t compare a plastic insert to a deep-milled face.
Jeff
Oct 15, 2014 at 3:20 pm
Tracy. Callie’s a blade.
Rich
Oct 16, 2014 at 5:09 pm
Tracy is a blade too. Tracy was a face balanced blade and Tracy II was a short slant neck blade.
JB
Oct 15, 2014 at 9:48 am
This just made my day! Counting down the days!!