Equipment

Matrix TPHDe shafts

Published

12 years ago

Apr 16, 2014

Matrix’s new TPHDe shafts use the latest materials in a new construction that can improve ball speed, feel and stability, according to the company.

Like its predecessor, Matrix’s TPHD shaft, the TPHEe uses exotic materials such as Zylon, Boron and Gmat to stabilize the shaft without increasing weight or making the shaft feel stiffer.

[youtube id=”_JASvOxzjU0″ width=”620″ height=”360″]

In Matrix’s TPHD, the HD section, or 16-sided hexadecagonal internal platform, was located in the upper portion of the shaft. In the TPHDe, Matrix extended the HD section down the body of the shaft. According to Chris Nolan, Matrix’s executive vice president for global operations, that allowed the company to make improvements to the shaft’s design that were not possible with the TPHD.

“In car terms, we’re trying to make sure the chassis is as stiff as possible,” Nolan said. “By extending the HD section, we’re able to increase stability without losing feel.”

The exotic materials and the construction of those materials, however, come at a cost. With a $1200 MSRP, the TPHDe is one of the priciest shafts on the market.

“We’re dealing with different raw materials that have different properties, and it’s a very technical process to get those materials to stay together,” Nolan said.

The TPHDe shafts offer a mid-launch, mid-spin trajectory and are available in weights of 50 grams, 60 grams and 70 grams in eight different flexes ranging from lady to XX-stiff.

They have a balance point that is about 0.5 inches higher (toward the butt section) than the TPHD, which allows golfers to retain traditional swing weights with today’s heavier club heads or build the driver to a longer finished length to increased club head speed.

Matrix’s TPHDe shafts will ship to retailers later this month.

Related Topics:Matrix shafts

Up Next

TaylorMade launches White SLDR Driver, appoints new CEO

Don't Miss

Jonas Blixt WITB 2014

Zak Kozuchowski

11 Comments

xboxkilla

Jul 22, 2014 at 2:50 am

If you really want a $1200 shaft, but for way less than these guys are charging- go with a Penley shaft. They sell them on their site and the designer can be contacted almost anytime to answer questions-
check out the ET2 on there-
http://www.penleysports.com/products/penley-et2-shaft/

Reply Report comment
TheLegend

Apr 20, 2014 at 5:28 pm

lol nice trying to save this guy zak. He should never talk again. But you did a good job trying to find out what these shaft actually do better. But he had no real answer.

Reply Report comment
- Zak Kozuchowski
  
  Apr 20, 2014 at 7:43 pm
  
  Guys,
  
  I think you’re being a little hard on Chris. It was an impromptu interview about a very complex shaft. He’s an extremely kind, knowledgeable guy, and the fitters I speak to on a regular basis praise Matrix’s products as some of the best at creating a little extra ball speed.
  
  Shaft companies spend a lot of time trying to explain their products to the masses, but the only real way to know how each will affect your performance is to find a custom fitter who stocks a lot of shafts and hit them for yourself. Most good club fitters will work within their customer’s budget, giving them several options at different price points. The TPHDe is certainly not for everyone, both in its cost and profile, but fitters such as Modern Golf in Toronto sell quite of few of them. To each is own.
  
  Reply Report comment
brad

Apr 17, 2014 at 7:19 am

In his defense, it is quite difficult to push the tech boundary…these things are pricey in the beginning, but as it takes hold and materials and processes become more common, we’ll see similar shafts at “reasonable” prices. Remember, none of our wives or girlfriends understands why the thousand dollar irons we play are any better than the irons she saw at Target. If it were anyone but Matrix, I would call BS, but they’ve never let me down. Now we wait…

Reply Report comment
- west
  
  Apr 17, 2014 at 2:40 pm
  
  Umm it’s not the price that I’m surprised by. Yes, the materials and processes used to make this shaft actually justify its cost. This shaft is like the Lamborghini of golf shafts, and while not everyone can afford an exotic or needs the performance of an exotic, it’s the people with excess cash who can justify the self indigence, no questions asked. What shocks the hell out of me is this “executive’s” piss-poor ability to market his company’s product. If I didn’t already know all the tech about golf shafts, and was just an average Joe golfer in the market, after seeing this interview I would not have any confidence in the TPHDe line or Matrix as a company. Just surprises me how unprepared this guy was to pitch his product…
  
  Reply Report comment
west

Apr 17, 2014 at 4:04 am

This guy is the VP of operations? Seriously??

Reply Report comment
R

Apr 17, 2014 at 12:19 am

Gotta say I wasn’t impressed with this guys interview. Zak had to come in at the end and kind of bring some positivity back to it.

Reply Report comment
Nick

Apr 16, 2014 at 7:16 pm

For $1200 Im taking another golf vacation instead.

Reply Report comment
- Petercybulski
  
  Apr 16, 2014 at 7:42 pm
  
  Well said
  
  Reply Report comment
Petercybulski

Apr 16, 2014 at 5:17 pm

Gonna put those bad boys in my woods and irons!!!

Reply Report comment
Xreb

Apr 16, 2014 at 4:39 pm

You can see the guy struggling to explain the price point of the shaft, although I give him credit for keeping the BS to a minimum !

Reply Report comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Then and now: Comparing Rory McIlroy’s current setup to his record-breaking 2019 Canadian Open victory

Published

2 hours ago

Jun 11, 2026

Alistair Cameron

In Rory McIlroy’s first appearance at the 2019 RBC Canadian Open, he crushed the record books to earn his 16th PGA Tour title in dominating fashion, winning by seven shots over Shane Lowry and Webb Simpson.

McIlroy’s score of 22-under-par 258 is the lowest 72-hole score to date at the Canadian Open, and his closing 61 is also the best final-round score in the history of one of golf’s oldest tournaments. Finally, with his win in 2019, McIlroy became only the sixth player to win the career Triple Crown, adding to his victories at the U.S. Open in 2011 and The Open Championship in 2014, joining Tommy Armour, Walter Hagen, Arnold Palmer, Lee Trevino and Tiger Woods in a coveted list.

So, with that, why not compare his current setup to the clubs he used to break all the records?

Driver

2019: TaylorMade M5 (9 degrees), Shaft: Mitsubishi Tensei CK Pro White 70 TX
2026: TaylorMade Qi4D (9 degrees @8), Shaft: Fujikura Ventus Black 7X (45 5/8 inches)

McIroy led the Tour in Strokes Gained: Off-the-Tee in 2019; he’s doing the same in 2026. Between now and then, McIlroy has switched from the Mitsubishi Tensei CK Pro White 70 TX (a shaft with slightly more feeling in the tip) to the original Fujikura Ventus Black 7X, having just made the change to the heavier version from playing the 60X.

What’s interesting about McIlroy’s 2019 setup is that the weighting on his driver is actually set in the high-draw setting, using the T-Track weighting system, whereas in the Qi4D, he’s currently using a heavily rear-weighted setup. (Two 13-gram weights in the rear and only two 4-gram front weights.)

The TaylorMade M5 driver he played in during his Canadian Open win was the company’s first head that they claimed to design to initially exceed the USGA’s COR limit, and then injected with tuning resin to bring it back in bounds.

Fairway woods

2019: TaylorMade M6 3-wood (15 degrees), Shaft: Mitsubishi Tensei CK Pro White 80 TX; TaylorMade M5 5-wood (19 degrees), Shaft: Mitsubishi Tensei CK Pro White 90 TX
2026: TaylorMade Qi4D 3-wood (15 degrees), Shaft: Fujikura Ventus Black 8X; TaylorMade Qi4D 5-wood (18 degrees), Shaft: Fujikura Ventus Black 9X

The TaylorMade M6 fairway wood that McIlroy was using during the 2019 season is still in the bag of some of the best golfers on Tour in 2026. Just check out Justin Rose’s winning setup from the Farmers Insurance Open earlier this year. This year, though, McIlroy has still been searching for his top-end-of-the-bag setup, having played both the new Qi4D and the Qi10, which he won the Masters with.

The same shaft swap can be seen in the fairway woods as the driver, along with slightly less loft on the 5-wood.

Irons

2019: TaylorMade P750 (4) Buy here, TaylorMade P730 (5-9), Shafts: Project X 7.0
2026: TaylorMade P760 (4), TaylorMade Rors Proto (5-9), Shafts: Project X 7.0

The biggest difference between McIlroy’s custom set and the stock P730s is the groove design. While the P730s were constructed with 14 MX-9 grooves on their milled faces, McIlroy’s proto heads instead use the higher-spinning, 16-groove layout of the TW2 grooves. Other big differences between the sets are that McIlroy’s 7- and 8-irons have thinner toplines, are 1 degree stronger in loft, and are 1/4 inch longer than the original P730 builds.

With McIlroy’s 4-iron, the switch from P750 to P760 sees a transition to a two-piece construction with Speed Foam in it, which allows McIlroy to launch the ball slightly higher, with more workability.

Wedges

2019: TaylorMade Milled Grind (48-09SB), TaylorMade MG Hi-Toe (52-09SB, 56-09SB, 60-LB09), Shafts: Project X Rifle 6.5
2026: TaylorMade MG5 (46-09SB, 50-09SB, 54-11SB, 60-08LB @61), Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)

Between 2019 and 2026, McIlroy’s focus on his short game has been much more apparent. It was the reason why he switched back to the TP5 golf ball, to help with launch, spin and control with his wedges leading up to his career Grand Slam victory in 2025. The most apparent changes to McIlroy’s wedge setup are his lofts and bounce. He’s slowly delofted his pitching to a sand wedge, but has increased the loft on the lob wedge, bending his current 60-degree to 61. With that, adding more loft to his lob wedge also slightly increases the bounce and leading-edge sit point, so, as a result, he plays a lower-bounce lob wedge compared to 2019. The MG5 wedges are also softer than the first Milled Grind option from 2019. McIlroy also no longer plays the full-face grooves found on the Hi-Toe.

Putter

2019: TaylorMade Spider X
2026: TaylorMade Spider Tour X

Notice anything similar. Yes, the copper finish on Rory McIlroy’s Spider X putter in 2019 is a slightly more reflective finish than the recently released torched PVD finish. McIlroy was using the True Path alignment system, but now uses only a single white sightline.

Ball

2019: 2019 TaylorMade TP5 (#22)
2026: 2025 TaylorMade TP5 (RORS)

As mentioned above, McIlroy had transitioned from the TP5 to TP5x golf ball since his victory in Canada in 2019, but now is black with the same style of golf ball as his victory at Hamilton Golf & Country Club.

Grips

2019: Golf Pride Tour Velvet Cord
2026: Golf Pride MCC

Interesting, McIlroy actually used Golf Pride’s Tour Velvet Cord grips during his victory in 2019 (it was during a 2+ year switch to the corded TV) as opposed to his usual MCC grips, which he has played for most of his career.

Equipment

From the GolfWRX Classifieds: Titleist Vokey Proto Wedges 54M, 60T

Published

4 hours ago

Jun 11, 2026

Will Schube

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @Putt4Dough is selling some prototype wedges from Vokey Wedgeworks. These include a 54 degree wedge with the M grind and a 60 degree wedge with a T grind.

From the listing:

(1) Titleist Vokey Proto Wedge 54M with a Tour Issue DGS400 shaft and Golf Pride Tour Velvet (logo down). Standard length, lie, and loft. BB&F ferrule. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

(2) Titleist Vokey Proto Wedge 60T with a KBS Tour 130X shaft and Golf Pride Tour Velvet. Standard length, lie, and loft. Raw wedge in good condition. No initials. Price is $200 shipped. Buy both wedges for $380 shipped.

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules.