Equipment
James Patrick joins Titleist
Wedgemaker James “Patrick” Harrington has announced on his website that he has joined Titleist “to further advance [his] passion and creativity” with wedges.
For years, there has been speculation that Titleist has been looking for a wedgemaker to succeed legendary wedge maker Bob Vokey, for whom the company’s current line of wedges is named. Vokey, 73, has suffered several health problems in recent years, including kidney cancer in 2008.
Harrington, 30, has a reputation as one of the best wedge grinders in the industry. He had a well publicized split with Edel Golf in January 2011, and has since been producing handmade wedges for his own company, James Patrick Golf, which he founded in his home state of Wisconsin.
Harrington did not make clear what role he would take with Titleist, only saying that the company is “providing the resources needed to continue to explore the unending pursuit of creating the world’s finest wedges.”
He thanked his fans for “helping to build the foundation,” and said that move to Titleist is “the next step in the journey of my life’s work.”
Above: Custom wedges created by Harrington for James Patrick Golf.
James Patrick wedges were created one at a time by Harrington, allowing him to make them with custom grinds, finishes and stampings that caught the attention of several golf websites and publications. Even though the wedges had a base price of more than $300, with custom options that could cost customers hundreds more, Harrington struggled to keep pace with demand for his products, which are currently listed as “sold out” on his website.
Harrington ground the handmade wedges from Kyoei forged blanks, and created them with a design that included a thinned out hosel for less resistance on shots from the sand and grass, as well a three tungsten weights in the toe section of the wedges that Harrington said move the center of gravity closer to the wedge’s sweet spot for more consistency.
Prior to starting his own company in 2011, Harrington attended Arizona State University, where he graduated from the PGA Management program. He went on to work as a grinder for leading club fitters Hot Stix and Cool Clubs, and trained under legendary clubmaker Don White in 2008.
According to his website, Harrington has worked with PGA Tour professionals Fulton Allen, Cameron Beckman, Robert Garrigus, Peter Jacobson, Matt Kuchar, Ryan Moore, Kevin Streelman and Aaron Baddeley, for whom he ground a set of irons that Baddeley used to win his first Tour event in 2006.
Click here to read what members are saying about James Patrick’s move in the forums.
This week, we have our Tour Photographer, Greg Moore, on the ground at the OccuNet Classic at Tascosa Golf Club in Amarillo, Texas, for the 14th event of the 2026 Korn Ferry Tour season. With that, we see some great things in the Lead Tape Report as we roll into Amarillo.
Joel Thelen
Monday Qualifier, Joel Thelen is in the field this week. He has played on the Korn Ferry Tour for a full season in 2023, and he is back in action this week. A couple of clubs caught my eye this week in his bag.
First off: His trusted Titleist 816 H2 hybrid. This club came out in October of 2015, and it still remains strong in the bag. Also, take a look at this Odyssey White Hot OG 7, putting a capital S in the 7S model. This custom neck has some impressive lean for an arm-lock-style putter. The bottom of the putter is covered in tape for optimal weighting.
Mitchell Meissner
Taking a look at Mitchell Meissner’s bag this week, we have some great lead tape coverage. Top to bottom working from fairway metals, irons, and wedges. We can see on the short irons and wedges that there is tape at the base of the grip, adding a little counterbalance. Along with that, some tape on the short irons and wedges as well. Moving to his putter, he rolls the Odyssey 7 Bird putter. Meissner putts left-handed and strikes the ball right-handed.
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament.
Driver: Titleist GTS2 (8 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: Titleist GTS3 (15 degrees, B1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 70 TX
7-wood: Titleist GTS3 (21 degrees, D1 SureFit setting)
Shaft: Mitsubishi Chemical Tensei 1K Pro Red 80 TX
Irons: Titleist U505 (3), Titleist 620 MB (4-9)
Shafts: Fujikura Ventus Black HB 8 X, True Temper Dynamic Gold Tour Issue
Wedges: Titleist Vokey Design SM11 (48-10F, 52-12F, 56-14F), WedgeWorks (60-K*)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putters: Scotty Cameron Tour Prototype, Scotty Cameron GOLO 6.3 Prototype
Grips: Golf Pride Tour Velvet Align
Ball: Titleist Pro V1
In our forums, one user has offered up a prompt for the true sickos, inviting fellow forum members to share every set of irons they’ve ever owned. As to be expected, this is a lengthy forum topic.
@Lamosteve began:
Can you name every set of irons you’ve owned? Here’s mine
Spalding Dots
Spalding Eclipse
Ram Lazer FX
Lynx Parallax
Mizuno EZ Comp
Ben Hogans
Cleveland CG Red
Taylor Made R9s
PING i20
PING iE1
Taylor Made M6
Our members in the forum have been offering up their own collections. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- macedan: “Started with a hand-me-down Golden Bear set from my brother when I was in high school, never really played more than once a year or got into the game until about summer of 2017. First purchased a set of Cleveland CG4’s (I actually really miss this set sometimes, soft & not terribly large for a GI iron), moved into Nike Vapor Fly’s by the end of the year. Those lasted until spring of 18 when I decided I wanted new, so I traded them in for TM Rbladez. Honestly, although I liked the Rbladez, poor decision on my part, I think this was really about the only time so far that after a week or two I was kicking myself for not staying with what I had. Rbladez stayed with me until late last summer when I switched to P790’s and (knock on wood) I am hoping this will be my longest lasting set.”
- JimmyC59: “MacGregor Jack Nicklaus Triple Crown. Palmer The Standard. Still play these.”
- jgrzask: “Tommy Armour 845u
Mizuno MP-32
Mizuno MP-33 (2 sets)
Bridgestone J33cb – still own
Srixon i-302 (2 sets) – still own
Tourstage X-Blades – still own
Mizuno Hot Metal – still own
Nike Forged Blades – still own
Titleist 714 AP1 – still own
Cobra Forged SS – still own”
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
What’s the story behind Webb Simpson’s custom-stamped irons?
Memorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Russell Henley’s winning WITB: 2026 Charles Schwab Challenge
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.T. Poston’s winning WITB: 2026 Memorial Tournament
Aaron Rai’s winning WITB: 2026 PGA Championship
Best irons 2026: Best irons overall, most forgiving irons, and more
Cameron Young’s winning WITB: 2026 Cadillac Championship
Bud Cauley WITB 2026 (June)
Bud Cauley had >14 clubs in his bag when photographed prior to the Memorial Tournament. Driver: Titleist GTS2 (8 degrees) Shaft: Fujikura...
Hannah Green WITB 2026 (June)
Driver: Titleist GTS3 (10 degrees, D4 SureFit setting) Shaft: Mitsubishi Chemical Diamana RB 53 S 3-wood: Titleist GT3 (15 degrees,...
Asterisk Talley WITB 2026 (June)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Blue 6 S 3-wood: TaylorMade Qi4D (16.5 degrees) Shaft: Fujikura Ventus Blue...
Brianna Do WITB 2026 (June)
Driver: Callaway Quantum Triple Diamond (9 degrees) Shaft: KBS PGW 3-wood: Callaway Elyte Titanium (15 degrees) Shaft: KBS PGW 5-wood:...
-
Equipment6 days agoMemorial Tournament Tour Report: Rory McIlroy, Cameron Young switch up drivers, and more
-
News1 week agoRussell Henley’s winning WITB: 2026 Charles Schwab Challenge
-
Whats in the Bag3 days agoJ.T. Poston’s winning WITB: 2026 Memorial Tournament
-
Equipment3 days agoBest irons 2026: Best irons overall, most forgiving irons, and more
-
Equipment1 week agoDetails on Jason Day’s latest prototype Avoda iron setup
-
Equipment3 weeks agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
News2 weeks agoCharles Schwab Challenge Tour Report: MacIntyre, Åberg and Spaun all switch putters, TaylorMade launches new Spider
-
Equipment2 weeks agoDetails on J.J. Spaun’s surprise putter switch
EZ
Jun 26, 2016 at 11:57 pm
…..And yet….3 YEARS go by without anything….did they just buy him out and make him sign a non-compete for the rest of his life? What a shame.
BigBoy
Jul 30, 2013 at 12:04 am
im going to sprinkle hundreds and thousands all over my Cleveland wedges
Juan
Jul 29, 2013 at 2:11 pm
a good thing gone bad….bring on the mass production
Jack Lives Here
Jul 28, 2013 at 6:30 am
James wedges are beautiful. Van Gough was under capitalized as well. I wish James every success with the new position.
SAMPGA
Jul 27, 2013 at 6:40 am
I’VE GOT WORD FROM THE INSIDE THAT JP WILL BE IN CHARGE OF AN ULTRA HIGH END LINE OF WEDGES FOR JAPAN…Voke will be here forever!
Blanco
Jul 26, 2013 at 9:15 pm
Does this guy ever smile? He needs to a visit to smiley-town. My guess is they don’t go into full on JP-mode for many years (if he stays on that long)– he’s there for more design and tour stuff not marketing. His name doesn’t ring out yet but will one day.
Personally I think his wedges look gaudy with the exception of the unstamped raw steel stuff I’ve seen. I think his grinds are excellent though.
Scott Rose
Jul 26, 2013 at 1:04 am
Hmmm….form or function? I’d rather see an artist stay solo.
Clayton
Jul 25, 2013 at 4:59 pm
“Show me the money!!!” – JP
HBL
Jul 25, 2013 at 3:31 pm
Probably for us, the masses, there will be no change. Almost impossible to get now and, at least, in the near past. In the future, we can expect mass produced wedges with the pros getting the custom work like it is with Vokey.
The Real James
Jul 25, 2013 at 1:49 pm
I wonder how a mass produced JP will look?
Ever try grinding a wedge? It’s pretty easy if you have a good grinding machine, and then 5 swings later all the prettiness is left in the turf.
princeton
Jul 25, 2013 at 12:00 pm
This is the biggest news in the Golf Equipment Business in years!!!! This is huge that Vokey as tapped his heir apparent to take over once he retires fully! Vokey stated yesterday that he is only working two or three days a week and for the every so often special request from a Tour Pro! I wonder how Aaron Dill is feeling today? I am sure that this hurts him a little, as thoughts were that he would be Vokey’s pick for his replacement…?
Jack
Jul 25, 2013 at 2:39 am
Plus, I doubt he is really taking over for Vokey. I think he is more likely to create his own line (much younger and different look), much like he is doing already, but backed by Titleist’s money and marketing power.
Jack
Jul 25, 2013 at 2:17 am
I like the look of the wedges, but not at 300+ before custom options!
RatzA$$
Jul 25, 2013 at 1:45 am
Wow that’s awesome. Someone stamps a sand wedge, quick paint fill of skittles like colors and a “special grind” and presto! Every minute a sucker is born.
Those that can’t dress like Fowler can have clubs that approach his outfits.
BHahahahhaha
Roger
Jul 26, 2013 at 3:11 pm
Ratz i’m still Lovin my Ping Eye 2 BECU wedge!!! Classic great looks and feel …and a great Wedge too !!!
Desmond
Jul 25, 2013 at 1:41 am
“I don’t want to be the big-box retailer,” Harrington said. “I like the roots of where I’m at, me making hand-made stuff. I’m able to offer a unique look because I’m an artist. I don’t want to grow too fast.”
An odd change for a guy who didn’t want to be a big-box retailer, but wanted to be an artist.”
lol.
KCCO
Jul 25, 2013 at 8:41 pm
Confused by this comment…..but anyway JP has always been an artist, and when at his level, each day his work will only progress, with that being said, when the time comes I wonder if he has more of a gamer wedge (meaning no frills on the looks, and just a performer), and be able to dull it down a bit, just a clean wedge and something thats gonna fill the vokey void when that day comes…. curious as to how they much different they would play then the beautiful designer stuff I’ve seen in his galleries history, as most look like collector pieces I would decorate my house with…..not being sarcastic, his work is top notch
J
Jul 24, 2013 at 11:24 pm
His wedges are sick!
Will be curious to see what kind of prices come out of the Titleist custom shop now..
JP wedges and Scotty putters… You could spend 5,000 and walk away with just your wedges and a putter.